Why would switching to virtual mode fix this? I turn the receiver back on before I turn SenseNav or the VS back on, so I'm not sure why it doesn't find the receiver.
Eric On Sun, Aug 3, 2008 at 8:39 AM, James Mannion <[EMAIL PROTECTED]> wrote: > Eric, > I am sorry I need to make one correction / addition to my previous > reply. I later remembered that it has been my experience with this > that you need to turn off bluetooth when loading sense nnav in order > for it not to look for a receiver when it is loading as you described. > > Jim > > > On 8/2/08, James Mannion <[EMAIL PROTECTED]> wrote: > > Hi Eric, > > As for your first mentioned problem, the thing about not being able to > > find a receiver when you turn it on again, if you press the letter v > > at that point in time to switch it from live to virtual mode, that > > should take care of it. It will return to live mode, or at least > > atempt to, if that was what you had it in last time you used it. It > > will return to whichever mode you last had it in. As for the problem > > about the slow downs, I am not sure about that one. I have actually > > never had mine in live navigation in any urban cannions as of yet so I > > don't know. There is no specific mode for that either. If there is, > > that is really news to me. I'm not even sure what such a mode would > > do, but if you have some ideas maybe you could suggest those ideas for > > future updates. > > > > Jim > > > > > > > > On 8/2/08, Eric Brinkman <[EMAIL PROTECTED]> wrote: > >> Hi, > >> > >> I have noticed two issues with SenseNav recently. Firstly, if I am > using > >> it > >> in live navigation, close SenseNav and then turn off the receiver, the > >> next > >> time I turn the receiver on and start SenseNav it will tell me it cannot > >> detect a receiver. The only way I have been able to correct this is by > >> re-pairing the receiver with the bluetooth manager. Secondly, today in > >> manhattan I experienced a lot of slowdown when trying to use SenseNav in > >> live navigation. This may be due to the many large buildings, but I > don't > >> know why it would slow the program down. Can I put it into urban > cannyon > >> mode? If so, how do I do this? > >> > >> Thanks in advance. > >> > >> Eric > >> > > > >
