Vicki,
Why do you have to b in computer braille for this to work?
----- Original Message -----
From: "Vicky Collins" <[email protected]>
To: <[email protected]>
Sent: Tuesday, August 03, 2010 10:28 PM
Subject: Re: [GWN] voice sense confusionRe: [GWN] voice sense confusion
> One more thing. To update that old file on your machine, meaning the
> one
> that gives the older version of the VS, you would do the following:
> From the main program menu, press h to go to the help menu.
> Next, press space with dots 4 5 6 to go to the bottom of the help menu.
> Then, press space with g until you hear computer Braille.
> Next, press enter on the item at the end of that help menu, meaning the
> one that says information about the voice sense.
> Next, when the information in that file starts to read, tab once to the
> save button and press enter.
> You will then have a new vsinformation.txt file in the root of your
> flash
> disk.
>
> ----- Original Message -----
> From: Vicky Collins <[email protected]>
> To: unknown [email protected]
> Date: Tuesday, Aug 3, 2010 23:09:22
> Subject: Re: [GWN] voice sense confusionRe: [GWN] voice sense confusion
>
>ar
>ar
>ar Okay, what happens when you press enter o when you launch the Sense
>NAV
>ar program? Or, maybe even better, this quote from part of the Sense
>NAV
>ar help file on the VS will help:
>ar When SenseNav launches for the first time, the map data location and
>the
>ar GPS receiver type will not be set. To tell SenseNav the location of
>your
>ar maps, do the following:
>ar 1) From SenseNav, press ENTER-O. It will then ask you to choose a map
>ar folder.
>ar 2) You will be placed on one of the memory storage devices such as
>the
>ar Flashdisk or SD card. If your maps are located in a place other than
>the
>ar default location, press BACKSPACE until the correct storage device is
>ar displayed. Press ENTER on that device and then navigate to the
>correct
>ar folder using a combination of the ENTER key and the arrow keys. It is
>ar important that you not press ENTER once you reach the folder
>containing
>ar your map files.
>ar 3) Press SPACE to select the map folder, then press ENTER and
>SenseNav
>ar will load the maps contained in the selected map folder.
>ar
>ar Please note: The authorization key named SenseGPS.KEY must either be
>ar located in the root of the memory card, or inside the map folder
>itself.
>ar If it is not, SenseNav will not FUNCTION. By default, the
>authorization
>ar key is already present in the root of the memory card, so this should
>not
>ar be an issue as long as the key has not been removed or renamed.
>ar
>ar
>ar
>ar
>ar ----- Original Message -----
>ar From: "Mary Otten" <[email protected]>
>ar To: "[email protected]" <[email protected]>
>ar Date: Tuesday, Aug 3, 2010 22:48:18
>ar Subject: Re: [GWN] voice sense confusion
>ar
>ar >
>ar >
>ar > Ok, space with v from th menu yields the same info that you
>reported.
>ar > The other info came from a file on the machine that has the mac
>address
>ar > and the hardware version and a bunch of copyright info. So I guess
>that
>ar > is an old file that doesn't change with upgrades. So ok. I have the
>ar > latest firmwear. I have put my gps key into the mapaid folder,
>which
>ar > has
>ar > 3 oregon 2010 maps in it along with several poi files. And sensenav
>ar > insists on asking me to point to my maps folder when I try to
>activate
>ar > the program, and when I do point at the folder, it says no items.
>So
>ar > I'm stumped.
>ar >
>ar > Mary
>ar >
>ar >
>ar > On Tue, 03 Aug 2010 22:02:36 com0400, Vicky Collins wrote:
>ar >
>ar > >Just to make sure we're looking at the same information, I did the
>ar > >space with V from the VS program menu, and I'm told I have version
>5.5
>ar > >build 20100630. I upgraded the Sense NAV and it is working just
>fine
>ar > >for me.
>ar > >
>ar > >----- Original Message -----
>ar > >From: "Mary Otten" <[email protected]>
>ar > >To: "[email protected]" <[email protected]>
>ar > >Date: Tuesday, Aug 3, 2010 21:12:54
>ar > >Subject: [GWN] voice sense confusion
>ar > >
>ar > >thx^^20.
>ar > >thx^^20.
>ar > >thx^^20. Hello all,
>ar > >thx^^20.
>ar > >thx^^20. I just got my voice sense back from being repaired. I
>hadn't
>ar > >used it
>ar > >thx^^20. for quite a while prior to the repair. I purchased the
>ar > >sensenav upgrade
>ar > >thx^^20. and the GW folks said that it would be upgraded while it
>was
>ar > >in the
>ar > >thx^^20. shop. So I got the VS and put the new maps from the 2110
>set
>ar > >into the
>ar > >thx^^20. mymaps folder, having first erased the old ones but left
>the
>ar > >key, since
>ar > >thx^^20. I thought it might be the new key. Sensenav asks me to
>ar > >specify mymaps
>ar > >thx^^20. folder which I did, and it said no items. So I deleted
>the
>ar > >key and
>ar > >thx^^20. copied over the new key that GW had sent me. Still no
>luck.
>ar > >When I
>ar > >thx^^20. select mymaps folder when prompted by sensenav, I still
>get
>ar > >no items
>ar > >thx^^20. listed. The key is in the mymaps folder and mymaps is
>off
>ar > >the root of
>ar > >thx^^20. the flashdisk. Then I got the wild idea that maybe GW
>had
>ar > >forgotten to
>ar > >thx^^20. upgrade the firmwear but according to the annuoncement I
>get
>ar > >when I go
>ar > >thx^^20. for upgrade firmwear, I do have the latest. But my
>software
>ar > >version in
>ar > >thx^^20. the info is listed as 1.1 and I thought that was wrong.
>I
>ar > >thought we
>ar > >thx^^20. were up above 1.1 in software versions. So just color me
>ar > >exceedingly
>ar > >thx^^20. confused.
>ar > >thx^^20.
>ar > >thx^^20. Mary
>ar > >thx^^20.
>ar > >thx^^20. If you wish to unsubscribe from this list, visit:
>ar > >thx^^20.
>ar > >thx^^20. http://www.gwmicro.com/listserv
>ar > >
>ar > >If you wish to unsubscribe from this list, visit:
>ar > >
>ar > >http://www.gwmicro.com/listserv
>ar > >
>ar >
>ar >
>ar > If you wish to unsubscribe from this list, visit:
>ar >
>ar > http://www.gwmicro.com/listserv
>
> If you wish to unsubscribe from this list, visit:
>
> http://www.gwmicro.com/listserv
>
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv