Hi,

You can also record a GPS replay then when you are done recording the
replay, convert that replay into a route.  This will create a route
along the path you took.



On Thu, 14 Oct 2010 09:32:32 -0400
"Raul A. Gallegos" <[email protected]> wrote:

> Hi, in order to do a custom route, you will need to create a manual
> route. Here's how, so save this message.
> 
> 1. Start SenseNav and be sure you are in live navigation.
> 
> 2. Physically go to the starting point of your route.
> 
> 3. Press R, then N to create a manual route.
> 
> 4. Walk to the next point of your route. Whether it's a turn of a
> segment of the route you want to make significant.
> 
> 5. Add a waypoint by pressing space-k. A new waypoint dialog comes up.
> The most important thing here is to define whether you turn left, right,
> or continue straight.
> 
> 6. Physically move to the next significant part of your route and then
> do the same as step 5 again.
> 
> 7. Keep repeating steps 5 and 6 until you reach the end of your route
> and when you are at the end, save the route with r, then s.
> 
> Manual routes can be reversed so it will take you from the ending point
> back to the beginning as well.
> 
> Hope this helps.
> 
> On 10/14/2010 8:48 AM, Tessa wrote:
> > I want to do a route I haven't walked much. I've created a couple routes 
> > but 
> > they tend to go the shortest distance or something equally logical that 
> > isn't practical for me.
> > I want to go from my house to the bike path, follow the bike path, it 
> > splits 
> > a couple times, so I need to create a marker not sure if it should be a poi 
> > or a waypoint that says keep left here or whatever the requirement is going 
> > to be. I suspect the bike path isn't on the maps which makes this doubly 
> > challenging. The end of the route is a rather ambiguous middle of the 
> > street 
> > point where the bike path ends and it's time to turn round and come back.
> > I read the section on replay files and I'm not sure which would be more 
> > practical or even if I can create a manual route with only a rather vague 
> > destination. I could take the destination to the nearest street corner.
> > If I use replay to record the route, can I create poi's along the way and 
> > will they be spoken outside the replay file?
> > Thanks
> > Tessa
> > 
> > If you wish to unsubscribe from this list, visit:
> > 
> > http://www.gwmicro.com/listserv
> 
> -- 
> Raul A. Gallegos
> GW Micro Technical Support And Product Specialist
> Voice 260-489-3671, Fax 260-489-2608
> Web http://www.gwmicro.com
> 
> If you wish to unsubscribe from this list, visit:
> 
> http://www.gwmicro.com/listserv
> 


- 
The home of the Mystic Place blog and podcast.
http://www.mysticplace.info


If you wish to unsubscribe from this list, visit:

http://www.gwmicro.com/listserv

Reply via email to