HELLO Doug, I performed the test you requested and the results are as follows. Speech and the tone stop.
I am able to read the information with the progress bar hot key. It changes and so does the title when you go from one file to another. The progress bar script does nothing. For a while and then it will figure out that it needs to read a while longer. It figured this out always after the active foreground window changed for a second. Usually this does not happen but sometimes it does. Hth From: Doug Geoffray [mailto:[EMAIL PROTECTED] Sent: Monday, September 08, 2008 6:25 PM To: [email protected] Subject: Re: problem with progress bar script. Jim, So what if you also enable the speech to indicate the progress? I'm wondering if something is happening where it can't play the .wav files for the ascending tones? Enabling the speech indication would be a good test of this. Regards, Doug jim grimsby Jr. wrote: Hi Doug ok no problem. First I have it set to play ascending tones. It is set at 5% intervals speak progress is not checked. The progress hot key does infact change when I press it. For example it might show 10 percent when I press it the first time and then 35 percent the next as you would expect. Like I said this window goes and split a number of files in to smaller files. So it show it gets to the 100% mark and then stops tracking all other progress after that on the next file and the next etc. the hot key does however reflect the changing progress. I have another file to split here shortly would it help if I turned on speech to see if it only effects the playing of sound? From: Doug Geoffray [mailto:[EMAIL PROTECTED] Sent: Monday, September 08, 2008 2:26 PM To: [email protected] Subject: Re: problem with progress bar script. Jim, So how do you have Progress Bar indicator configured? Meaning are you reading the progress bar in seconds or by percentage? What is your interval regardless? If you press the Progress Or Scroll bar is the percentage changing as you would expect? Can you tell me the last thing the script speaks for you and what the hotkey is now speaking for you? Doug jim grimsby Jr. wrote: Hi Doug the window is still active and the commands you site work as I would expect. I thought of this and made sure before I reported the problem. I also tried to tab around the dialog and was able to move the focus from the cancel button to the priority list box with no problem. The window is very much active. -----Original Message----- From: Doug Geoffray [mailto:[EMAIL PROTECTED] Sent: Monday, September 08, 2008 12:37 PM To: [email protected] Subject: Re: problem with progress bar script. Jim, My guess would be that activation is going away from the window with the progress bars. What if you speak the current titlebar when they stop reading? What if you press the Window-Eyes Progress Or Scroll Bar hotkey (control-insert-b). If it speak the progress bar then the script should as well. But if activation is changing as I suspect, none of these will speak until activation goes back there. Regards, Doug jim grimsby Jr. wrote: Hello, There is a problem with the progress bar script where if you are in the same window that is performing task after task after a while progress bars stop sounding a tone or reading. You can reproduce this problem easily buy doing the following. Bring up gold wave. Now open a large mp3 file or whatever. Just as long as it is big. Now auto cue the mp3 file. Ok now split it. after a while progress bar reading will stop and you will have to minimize gold wave and talt tab in to it again to get progress bar indication back. Or sometimes window-eyes will start reading it on its own if the window title changes long enough for window-eyes to catch it. Hth. -- Doug Geoffray GW Micro, Inc. Voice 260-489-3671 Fax 260-489-2608 http://www.gwmicro.com -- Doug Geoffray GW Micro, Inc. Voice 260-489-3671 Fax 260-489-2608 http://www.gwmicro.com
