Hi Jonathan
When using this program there are issues for the path, including placing
path in quotes. Below is the link and tech blog on these issues, especially
running VB and such.
Bruce
http://support.attachmate.com/techdocs/2441.html
Switch Support in Reflection for HP, UNIX, OpenVMS, or ReGIS
The following switches are supported by R1Win.exe, R2Win.exe, and R4Win.exe.
/FMIGRATE
Causes the Reflection F-Secure Migration Wizard to display before Reflection
starts.
/LAYOUT <layout file>
Opens Reflection using the information contained in the layout file (*.rlo).
/N
Suppresses the display of the Reflection startup screen.
/NOCONNECT
Loads the connection information but doesn't automatically make the connection.
You
would want to use this switch, for example, if you wanted to make changes to
connection
settings in a settings file before connecting.
/NOLOADSETTINGS
Specifies that the default settings file, or any other settings file specified,
is
not loaded. This forces Reflection to load with its factory default values or
site
default values, depending on how it's configured.
/RB <command>
Where <command> is a Visual Basic command. Although the switch is called /RB,
the
Visual Basic compiler is used, not the older Reflection Basic compiler. This
startup
switch is identical to /VBA.
/RBS <script file name> [<script argument>]
Where <script file name> is a Reflection Basic script.
/RCL <command>
Where <command> is a Reflection command language command.
/RCLS <command language file name> [<command file argument>]
Where <command language file name> is a Reflection command language file
(*.rcl).
/S <settings file>
Where <settings file> is the name of a settings file to load.
When you specify multiple settings files, each successive one overwrites the
previous
settings. In the following example, the settings in the Second settings file
will
overwrite any toolbar settings that were in the First settings file.
"C:\Program Files\Attachmate\Reflection\R2win.exe" /S First.r2w /S Second.r2w
If your settings file name includes spaces, quotes are required. For example:
"C:\Program Files\Attachmate\Reflection\r2win.exe" /S "C:\My path\My
Settings.r2w"
If you use a UNC path for the file, it must begin with 3 backslashes.
(The /S switch can be omitted for the first settings file if it does not contain
spaces.)
/U <path>
Where <path> designates what your user folder will be for the current session.
If
no path is provided, the user folder that was designated at Setup will be used.
/VBA <command>
Where <command> is a Visual Basic command. This startup switch is identical to
/RB.
Use quotation marks around path names and/or commands that include spaces. Use a
double set of quotation marks for macro data contained within other quotation
marks,
for example:
"C:\Program Files\Attachmate\Reflection\R2win.exe" /VBA ".ConnectionType =
""TELNET""
" /VBA .Connect
/W <telnet URL>
Opens Reflection from a telnet URL, such as in a web browser (see also Technical
Note
2307
). If you have multiple startup switches, then the /W switch must be the last
switch
in the string.
Sent: Thursday, October 09, 2014 7:28 AM
Subject: Re: GetObject syntax / function
Chip,
Thanks for the advice in a later post I showed code that I ran directly with
the vbs system doing a GetObject of Reflection2.Session and CreateObject of
WindowEyes.Application. This code worked and WindowEyes spoke the current X
coordinate of the cursor. I then commented out the CreateObject and ran the
same script in the WindowEyes script host and the GetObject on the first line
failed to execute.
Bruce suggested I look at environment variables but I thought Object Name
translation was done via registry and I don’ know the specific place to look.
The binary is called “r2win.exe’
Best wishes,
Jonathan
On Oct 9, 2014, at 7:03 AM, Chip Orange <lists3...@comcast.net> wrote:
BTW, class # 16 (when I did a quick search), seems to include a discussion
of getObject().
Hth,
Chip
From: Chip Orange [mailto:lists3...@comcast.net]
Sent: Thursday, October 09, 2014 6:52 AM
To: gw-scripting@gwmicro.com
Subject: RE: GetObject syntax / function
Hi Jonathan,
There’s a trick to use of GetObject(); it does have two parameters, but the
first parameter should not be a null string, but should be omitted entirely if
what you want is to obtain a pointer to any currently running copy of this
application object (see my Word Advanced Features app, which does this, rather
than start up a second copy of Word). For instance:
Set WordApp = getObject(, “word.application”)
Then, if it ends up returning nothing, you can then use CreateObject() to
start the application.
As Steve says, this is standard VBScript, so you can search the internet
for all information on it.
Hth,
Chip
From: Jonathan C. Cohn [mailto:jon.c.c...@gmail.com]
Sent: Tuesday, October 07, 2014 7:22 AM
To: gw-scripting@gwmicro.com
Subject: GetObject syntax / function
I am having issues reproducing a GetObject() command I am using in a JAWS
script to work in WindowEyes. In JAWS GetObject(R”eflection.Session”). Note
that in JAWS this takes just one argument. After invoking this command I can
act directly with the scriptable objects of the current session. In VBS with
WindowEyes the GetObject requires two parameters, where the second parameter
appears to be equivalent to the parameter that JAWS uses.
If I use a null string for the first parameter then Reflection creates a
new hidden window. If I use the path of the Reflections settings file then I
get a new session to the host. If I leave the first parameter completely blank,
I get back an ActiveX error. What am I missing here?
Thanks in advance for any hints.Best wishes,
Jonathan
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
