Sealing the basic structure might work well, in fact. The basic shapes are 
mostly geometric. I use balsa because it is also easy to pin details to the 
wood by simply sticking them in with a bit of glue. a sealing coat should make 
this impossible. I would have to be careful about the glues I used to glue 
surface details on, however.

-Eli

-------------- Original message -------------- 
From: "Star Ranger" <[EMAIL PROTECTED]> 

> > I am reaching out to the group for some help with using balsa some 
> > custom ships I'm doing. I am having a problem in the finishing 
> > because invariably there is a wood grain that shows through the 
> > paint. Is there a way to effectively seal the finish model that 
> > will allow me to give my completed models a smooth finish. I am 
> > trying to avoid switching to plastic card and such as I find it 
> > difficult to work with and less versatile than balsa, not to 
> > mention more expensive. 
> 
> I've used Sanding Sealer in the past for model rockets. You brush it on, 
> let it dry and sand it smooth and it might take 2-3 coats for a very smooth 
> finish. This may be a problem if your ships have areas that are hard to 
> sand. 
> 
> Here is the one I have seen on shelves locally: 
> http://www.hobbylinc.com/htm/mid/mid71-1.htm 
> 
> Something you could do is basic hull out of balsa, sealed and sanded, and 
> then details out of heavy cardstock (thin cardboard like a cereal box) or 
> plastic/metal bits. 
> 
> 
> Dean Gundberg 
> 
> Starship Combat News 
> The latest information on Space Games and Miniatures 
> http://www.star-ranger.com 
> [EMAIL PROTECTED] 
> 
> 
> _______________________________________________ 
> Gzg-l mailing list 
> [EMAIL PROTECTED] 
> http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l 
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

Reply via email to