My habit is to almost always fully assemble a miniature before priming, then 
prime and drybrush (or whatever other painting technique I use).

Some folks advocate the "prime and paint on sprue" as much as possible 'cause 
it is easier to hold the model, avoids getting finger oils on the paint between 
coats, etc.  

I find that after I put a lot of work into the paint, clipping it off the sprue 
will leave marks that are hard to remove, since filing or carefully trimming 
with a knife are likely to damage more paint... so then I end up doing work 
twice.

YMMV.

If you have primed on the sprue, then I would suggest assembling the miniature 
before painting.  that way, you can fix any rough spots in the glue up or where 
sprue marks are on the model, before you put effort into the drybrushing.

-Adrian
[EMAIL PROTECTED]


> 
> Should I start my practice drybrushing with the mini on the sprue or should
> I assemble them first?
> 



_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to