>Hi Mike,
>
>I'll try and really answer your question.
>
>Best way to attach steel to brass is with leather straps - DOH! - I couldn't
>help myself.
>
>Actually, soldering won't work. The solder will adhere to the brass but not
>to the steel washer, and if it is a galvanised washer there is a remote
>possiblility it will release some nasty fumes (as in poisoness). I know the
>fumes are released when galvanized steel is welded, I doubt soldering gets
>hot enough, but why take a chance?
>
>Super glues work best under tension and poorly under shear. So if the tube
>is crazy glued and then gets knocked, the tube surface will be in shear with
>the hole surface and the bond is likly to break. You could use a thick
>superglue and probably be ok if you make a little fillet (bead around the
>base of the tube). Clean the washer with alcohol to remove any oil residue
>from manuafacturing. Don't use any super glue accelerators as that they make
>the bond brittle.
>
>That said, your best bet is epoxy. For this type of bond, 5 minute will work
>but I'd look for J.B.Weld, found in most hardware and auto sections. It is
>the nastiest, grippiest, epoxy I have worked with that is readily available.
>Clean the parts with alcohol so you are sure it is free of redidue. Mix up
>the JB and get a liitle in the hole. Once the tube and the washer are
>together, get a little bead of epoxy around the base. While wearing a rubber
>glove (ooooh, rubber!) wet a glove covered finger with alcohol and smooth
>the bead into a nicely radiused fillet. You can clean any epoxy smudges off
>with alcohol and a piece of paper towel. When that's hardened, you will have
>a flight stand that you can drop on the floor and the bond is not going to
>give!
>
>Party on,
>Martin


I'd go with both - Superglue to quickly fix it in place initially and 
hold it there, then backfill with epoxy for the final strength.
Or you could use the leather straps if you prefer.....  ;-)

Jon (GZG)

>
>----- Original Message -----
>From: "Hudak, Michael" <[EMAIL PROTECTED]>
>To: "'Ground Zero Games List'" <[EMAIL PROTECTED]>
>Sent: Tuesday, November 18, 2008 9:00 AM
>Subject: [GZG] Bondage
>
>
>>  Hi everyone,
>>
>>  I'm trying my hand at making some flight bases over the winter this year.
>>  So far, I've got the post (square brass rod) and the base (fender washer).
>>  The post fits snugly in the base, with all four corners touching the rim
>>  of the inner hole.
>>
>>  My question is, what should I use to bond the brass to the steel?
>>
>>  I'm going to try solder...  Fills in the gaps and should hold well enough.
>>  Is this the right way to go?  Should I be looking at superglue or epoxies
>>  instead?
>>
>>  Any ideas/opinions welcome.
>>
>>  Thanks.
>>
>>
>>  Mike Hudak
>>  There are 10 types of people in the world, those who understand binary and
>>  those who don't.
>>
>>
>>  _______________________________________________
>>  Gzg-l mailing list
>>  [EMAIL PROTECTED]
>>  http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l
>
>
>--------------------------------------------------------------------------------
>
>
>
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.175 / Virus Database: 270.9.7/1798 - Release Date: 11/18/2008
>8:59 PM
>
>
>_______________________________________________
>Gzg-l mailing list
>[EMAIL PROTECTED]
>http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l


_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to