( Are you having a multi-master HA container group or having 2 containers
rg? Your description of the container rg is not very clear. )
I have 2 containers rg see:
Cluster Resource Groups ===
Group Name Node Name Suspended Status
---------- --------- --------- ------
zone-rg srv210 No Online
srv209 No Offline
clrs list-props
=== Properties for resource zone-hafast ===
GlobalDevicePaths
FilesystemMountPoints
AffinityOn
FilesystemCheckCommand
Zpools
=== Properties for resource zone-rs ===
Monitor_retry_count
Monitor_retry_interval
Probe_timeout
Child_mon_level
Validate_command
Start_command
Stop_command
Probe_command
Network_aware
Stop_signal
Failover_enabled
Log_level
zoneadm list -iv from both nodes
srv210
ID NAME STATUS PATH BRAND IP
0 global running / native
shared
- ldapserver running /zonas/ldapserver native
shared
srv209
ID NAME STATUS PATH BRAND IP
0 global running / native
shared
- ldapserver installed /zonas/ldapserver native
shared
About the quorum problem, What can i do about it ?
Other question, when i force problem with container on srv210 the other node
on srv209 delay about 5 minutes to up, how can i change this timeout/delay
to up the other node quickly ?
+++++++++++++++++++++++++++++++++++++++++++++++
Wesley Naves de Faria
Analista de Suporte
SCSA - Sun Certified System Administrator for Solaris 10
SCNA - Sun Certified Network Administrator for Solaris 10
FreeBSD / OpenBSD / Linux
AGANP - Agencia Goiana de Administra??o e Neg?cios P?blicos
Fone: 62 3201-6582
+++++++++++++++++++++++++++++++++++++++++++++++
_____
De: Madhan.Balasubramanian at Sun.COM [mailto:Madhan.Balasubramanian at
Sun.COM]
Enviada em: quinta-feira, 18 de outubro de 2007 15:37
Para: Wesley Naves
Cc: ha-clusters-discuss at opensolaris.org
Assunto: Re: [ha-clusters-discuss] Monitoring Public Netork in 2 nodes
Wesley,
1.) disconnecting the server from the switch,
Are you having a multi-master HA container group or having 2 containers rg?
Your description of the container rg is not very clear.
Pasting the output of the following commands will help:
clrg status <container-rg>
zoneadm list -iv from both nodes.
For the resource to failover in case of public network failure, you need to
configure the network address of the container using Logical hostname
resource. i.e zonecfg don't add network resource.
You can check the container guide from
http://docs.sun.com/app/docs/doc/819-3069
Regarding problem 2, I think there is a quorum issue. you need to check the
quorum configuration - /usr/cluster/bin/clq status
If the quorum disk is not online, then shutting down one node will panic the
other as well.
Best Regards,
Madhan Kumar
Wesley Naves wrote:
Hi,
|?m using SC 3.2 and HA container in 2 servers with 1 container
each. So, i?m doing some test:
1 ? Disconnect 1 server to switch ( nothing happen )
2 ? Turn off 1 server ( the other server shutdown and don?t up while the
other server don?t is up )
My question is following, i need configure for monitor the public network
for when 1 server down automatic ou failure the network the other assume
automaticly. How can i do my cluster well work.
Thank?s
+++++++++++++++++++++++++++++++++++++++++++++++
Wesley Naves de Faria
Analista de Suporte
SCSA - Sun Certified System Administrator for Solaris 10
SCNA - Sun Certified Network Administrator for Solaris 10
FreeBSD / OpenBSD / Linux
AGANP - Agencia Goiana de Administra??o e Neg?cios P?blicos
Fone: 62 3201-6582
+++++++++++++++++++++++++++++++++++++++++++++++
_____
_______________________________________________
ha-clusters-discuss mailing list
ha-clusters-discuss at opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/ha-clusters-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/ha-clusters-discuss/attachments/20071018/a783018b/attachment.html>
