Hi, Try to use 'clintr enable your-broken-interconnect-path'
On Wed, Nov 25, 2009 at 1:20 PM, Oddgeir Bell <obell at deltasoft.no> wrote: > Opensolaris 2009.06, Open Ha-Clusters 2009.06. > Using 5 direct interconnects, in 2-node cluster. After a while (from 1 to > several days), one of the interconnects faults. > If we try to remove that interconnect, then add it again, it still says > faulted in status view (clintr status). dladm show-links on one node says up > on the given nic, while the other node says down. ifconfig bnxX unplumb, > ifconfig bnxX plumb up on this node gives no errors, but the nic stays down. > When we do this, the log says copper link up (100mbit). Same procedure on the > other node gives log message copper link up (1000mbit), which is the right > speed. > Trying to force 1000mbit on both nodes with ndd didn't help. The only thing > that helps is a full restart of the node with the downed nic... > This has happened with 4 different nics on both nodes so far. > > I'm not a (open)solaris-expert (far from it), so there is probably something > I haven't tried... Hopefully, some of the experts here can help... :o) > -- > This message posted from opensolaris.org > _______________________________________________ > ha-clusters-discuss mailing list > ha-clusters-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ha-clusters-discuss > -- Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com
