Is it feasible to set up the HackRF to include programmable decimator functionality? At the moment the bandwidth is limited by the sample rate, since some spread-spectrum signals use a lot more bandwidth than the HackRF/USB port is capable of dealing with if you could get the HackRF to act as a decimator you could increase the effective bandwidth (with a corresponding loss in resolution,but since it's smeared across such a wide spectrum it probably doesn't matter much). This would also let you look at a wider frequency range using less CPU power, eg.1Msps to cover 10MHz bandwidth.
Dave.
_______________________________________________ HackRF-dev mailing list [email protected] http://nine.pairlist.net/mailman/listinfo/hackrf-dev
