# At boot the following leds are lit: # 3V3 USB RX TX (USB/RX and TX are dimly lit)
# At dfu boot the following leds are lit: # 3V3 USB RX TX (USB/RX and TX are dimly lit) # At dfu flash the following leds are lit: # 3V3 1V8 RF USB # At reset the following leds are lit: # 3V3 RF, USB and TX are somewhat lit and TX is dimly lit So yes, there is a change in leds on a power cyclue and after a reset. I'm using a HackRF One. On Wed, Sep 24, 2014 at 4:23 PM, Michael Ossmann <[email protected]> wrote: > On Wed, Sep 24, 2014 at 09:56:48AM +0200, hackrf hackrf wrote: > > > > I can boot the device in DFU and flash it again. But after every power > > cycle, it returns dead. > > > > See the following pastbin for more information. > > http://pastebin.com/PdY416ke > > Thanks for the details. Are you using a HackRF One (not a Jawbreaker)? > What do the LEDs do if you press the reset button after hackrf_spiflash? > Do they behave differently after a power cycle? > > Have you tried flashing the 2014.04.1 firmware? (I don't normally > recommend downgrading firmware, but it would be interesting to see if it > boots and appears on USB.) > > Mike >
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
