yup been following the lessons.. But I cant apply them yet.. cant run pentoo on any of my machine.. But will run ubuntu on one, waiting to have the time to install the whole thing by hands... just to let you know, Need the sweeping for tuning cavity's and duplexer.. will use a rtl-sdr to read the signal and will tx with the hack rf.. will be able to set notch and band pass like that.. will see if it works ;-)
> Date: Fri, 7 Nov 2014 16:50:28 -0700 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [Hackrf-dev] Can I do that? > > On Fri, Nov 07, 2014 at 06:37:28PM -0500, pete M wrote: > > > > BUT I do learn fast.. > > You might like to start here: > > http://greatscottgadgets.com/sdr/ > > I'm working on resuming lessons this month. > > > One other question.. can it also sweep in tx something like 7 mhz band > > of frquency very fast then start again all over and as long as needed? > > That is not a problem. There is some limitation to how fast the analog > front end (hardware) can be re-tuned, but that doesn't matter for > operations with a total bandwidth less than 20 MHz. A sweep over 7 MHz > can be done entirely in software without any requirement to re-tune the > hardware. > > Mike
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
