On 16 December 2014 at 10:22, Fabian Noeller <[email protected]> wrote: > > i got a little question about the external flash. Why use an external flash > instead of the internal of the LPC4320?
I don't believe that the 4320 has any flash, other models in the 43xx range do, but not the 4320. > i do some embedded SDR with die hackrf and i want to use the HackRF als SPI > Slave to my dsp board, but there is no free spi so ein thinking about > removing the External Flash (W25Q80BV). Could you implement it in firmware using the GPIO pins that are exposed on the headers? > Will there any problem for flashing the "ram" version of the Hackrf Firmware > after removing the external flash ? I had a Jawbreaker board without a flash chip, it worked OK as long as I wrote the firmware to RAM each time I plugged it in. However, I don't recommend choosing to do this. _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
