The problem with gr-air-modes and hackrf are the gain settings, no way to specify/adjust the 3 different gain settings available on the hackrf. The only gain setting that can be changed is the amp gain, no setting for lna or vga to make it usable with gr-air-modes. Or at least I wasn't successful at getting more than 1 plane at a time with only the amp gain and I'm only 20-30 miles away from KMCO. I did modify the radio.py on gr-air-modes a while back for my personal use to add the other two gain settings with help from bistromath who pointed me out with some information and it became somewhat usable. ________________________________________ From: HackRF-dev <[email protected]> on behalf of Chris Kuethe <[email protected]> Sent: Sunday, May 10, 2015 2:15 AM To: Tom N Cc: [email protected] Subject: Re: [Hackrf-dev] ads-b decoder with hackrf
https://github.com/bistromath/gr-air-modes On Sat, May 9, 2015 at 11:04 PM, Tom N <[email protected]> wrote: > Anybody try decoding ads-b with the hackrf? I know decoding programs such as > modesdeco2, adsbsharp like many other programs are not compatible with > hackrf so i tried dump1090 using --ifile and hackrf_transfer sending samples > to a fifo but no luck. > > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > -- GDB has a 'break' feature; why doesn't it have 'fix' too? _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
