Thank you so much for all friends who trying to help me. ( great group )Here
again, :( nothing working.
I used instructions under "Only if Necessary: Recovering the SPI Flash
Firmware", at this Wiki page:
https://github.com/mossmann/hackrf/wiki/Updating-Firmware
Everything is fine till I wrote dfu-util --device 1fc9:000c --alt 0
--download hackrf_one_usb_ram.dfu
I got this message:dfu-util: could not open file hackrf_one_usb_ram.dfu for
reading: no such file or directory
Again I know my main problem is ( I'm new user to UBUNTU OS)so please bear
with me for a while till I could fix my hackrf
Nader
From: Jared Boone <[email protected]>
To: Nader Omer <[email protected]>
Sent: Wednesday, January 13, 2016 8:26 PM
Subject: Re: [Hackrf-dev] Help please
Hi,
The PortaPack software is only useful if you have a PortaPack attached, and
will not behave like a HackRF over USB unless you use the PortaPack controls to
enter HackRF mode.
My suggestion would be to put the HackRF into DFU mode when attached to Ubuntu,
and use the dfu-util procedure to put a new copy of the HackRF firmware onto
the HackRF. Follow the instructions under "Only if Necessary: Recovering the
SPI Flash Firmware", at this Wiki page:
https://github.com/mossmann/hackrf/wiki/Updating-Firmware
Good luck!
- Jared
> On Jan 13, 2016, at 07:17, Nader Omer via HackRF-dev
> <[email protected]> wrote:
>
> And thank you so much for your time and your help.
>
> When I connect the Hackrf and write hackrf_info (OS ubuntu)
> I got = No Hackrf boards Found
>
> when I put the hackr on DFU mode ( on windows)
> I've noticed a board shows up with name LPC
>
> I try Portapack software ,under window 10 but still I got the same messgae
> No hackrf board detect?!!!
_______________________________________________
HackRF-dev mailing list
[email protected]
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
