On 2 May 2016 at 20:49, Paul Michelle <[email protected]> wrote: > > Put the unit in DFU mode and pushed “hackrf_one_usb_ram.dfu”. I was able to > do a hackrf_info and the board info was displayed. LEDs 3V3 (Green), 1V8 > (Yellow), RF (Red), USB (Green).
Which firmware version did hackrf_info report after you used DFU mode? > Proceeded to run “hackrf_spiflash –w hackrf_one_usb_rom_to_ram.bin” No > issues. hackrf_info - firmware version reflected the new firmware version > 2015.07.2 If the HackRF hasn't been reset yet, this version number will be coming from the DFU step above, not the version written with hackrf_spiflash. > After the unit reset, I only get LEDs 3V3 (Green), RF (Red) and TX (DIM > Red). Tried hackrf_info – no devices found. It sounds like your firmware isn't being written to flash correctly or is being written but is not able to be read back. This could be a hardware issue. Thanks, Dominic _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
