Turns out it was the antenna!!!
The following archived linked helped to resolve the issue...I didn't take my
antenna apart (yet) instead I tried another one and it worked immediately!!!
Sadly, I did spend time going through the archived mailing list before sending
my email but of course, shortly after sending it I found the solution.
[Hackrf-dev] Testing my new HackRF One
|
| |
[Hackrf-dev] Testing my new HackRF One
| |
|
On Thursday, July 21, 2016 4:19 PM, Bridgette via HackRF-dev
<[email protected]> wrote:
Hello,I recently purchased HackRF One from Hak5. Until today, I thought my
issues were related to my GRC scripts but I found someone with one and to my
surprise his worked without issues with my code. We concluded after a few more
tests that it looks like it is the device. I updated the firmware and the CPLD
but the firmware update did not change anything. The fm radio example from
Mike's tutorial is just noise. I am using the 75MHz - 1 GHz Telescopic Antenna
that came with it and the following hackrf_info output is:
Found HackRF board 0:
USB descriptor string: 0000000000000000453c64c8223a8f8f
Board ID Number: 2 (HackRF One)
Firmware Version: 2015.07.2
Part ID Number: 0xa000cb3c 0x006d4358
Serial Number: 0x00000000 0x00000000 0x453c64c8 0x223a8f8f
The version before the firmware update:
Found HackRF board 0:
Board ID Number: 2 (HackRF One)
Firmware Version: 2014.08.1
Part ID Number: 0xa000cb3c 0x006d4358
Serial Number: 0x00000000 0x00000000 0x453c64c8 0x223a8f8f
Any guidance on potential solutions?
Thanks,Bridgette
_______________________________________________
HackRF-dev mailing list
[email protected]
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
_______________________________________________
HackRF-dev mailing list
[email protected]
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
