Hi Chuck, Thanks for your fast response. I checked what you said and I was not member of group 'plugdev', however it might not be the problem as now I am member of the group and the problem persists.
I have read that Pentoo is recommended for this hardware, but as I have been working with Kali (I have seen people on the internet using it for sdr projects without any problem) I wanted to try to figure it out first. But yes, if I can't fix the problem in a while I will consider changing of distro... Marc. On 11/01/2017 19:28:18, Chuck McManis <chuck.mcma...@gmail.com> wrote: Since you are running in a VM anyway, consider downloading the Pentoo image as referenced by the GreatScottGadgets site. That is very plug and play with the HackRF-1. A long shot would be to look for is whether or not you are a member of group 'plugdev' since your ls of the dev tree showed that the hackrf is owned by root and only gives access to root or members of group plugdev. I don't think hackrf_info would work though if you weren't. On Wed, Jan 11, 2017 at 10:22 AM, Marc Pàmies Massip <mpamies...@gmail.com [mailto:mpamies...@gmail.com]> wrote: Hi, I am having some problems trying to use GNUradio together with a HackRF-One. The hardware seems to be fine as the LED lights turned ON and it works with SDR# on Windows. After running command "hackrf_info" on a Linux distro it returns this: Found HackRF board 0: Board ID Number: 2 (HackRF One) Firmware Version: 2014.08.1 Part ID Number: 0xa000cb3c 0x00554743 Serial Number: 0x00000000 0x00000000 0x466c64c8 0x278a43c7 I can see the device when running the "lsusb" command: Bus 002 Device 006: ID 1d50:6089 OpenMoko, Inc. And that's the output to "ls -l /dev/bus/usb/002/006" (I don't know if it will be useful for you) crw-rw----+ 1 root plugdev 189, 133 ene 11 16:38 /dev/bus/usb/002/006 Until here everything seems to work as expected. The problem comes when I execute a flowgraph with an osmocom source on it, then the program displays the following message: gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio 3.7.10 built-in source types: file fcd rtl_tcp rfspace redpitaya FATAL: No supported devices found to pick from. Trying to fill up 1 missing channel(s) with null source(s). This is being done to prevent the application from crashing due to gnuradio bug #528. I am running a Kali Linux as a virtual machine (with VMware), which is supposed to include multiple sdr tools. I think that the problem has to do with some libraries or tools for HackRF, but when I try to install or upgrade libhackrf or hackrf-tools the followin message appears in the terminal: root@kali247:~# apt-get install hackrf-tools Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package hackrf-tools The same message appears for libhackrf. Any idea of what could be wrong? I am a bit lost right now, any help is welcome. I don't know if I am missing something, if you need further information just ask. Thank you for your time, Marc. _______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com [mailto:HackRF-dev@greatscottgadgets.com] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev [https://pairlist9.pair.net/mailman/listinfo/hackrf-dev]
_______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
