On 02/23/2017 11:05 AM, Marc Pàmies Massip wrote: > Hello, > > I wanted to ask if it is feasible to use a HackRF with a Raspberry Pi. I > have seen that some people use both hardware together, but it sounds > strange to me considering that the minimum sample rate recommended for > the HackRF is 8 MHz. A Raspberry Pi can support such a high sample rate? > Are there any other drawbacks to consider if this combination was to be > done? > > Thank you in advance.
The sampling rate depends upon the problem. For instance, using a 8 MHz sampling rate to listen 16 kHz signal is overkill. No, the pi can't support high sampling rates. Even the Raspberry pi3 is to slow to run an SDR and the HackRF and do anything useful - except possible capture signals directly with the HackRF. And even then writing to microSD card may limit the sampling rate. Try an Odroid-XU4. > > > _______________________________________________ > HackRF-dev mailing list > HackRF-dev@greatscottgadgets.com > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > _______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
