Are there any other means of flashing the rom other than via the USB
Fernando?Permissions problems come from what source Fernando?
I have circled like a bird of prey around the FAQ's each resulting in no
connection.Many thanksColin
From: Fernando <ferna...@samara.com.es>
To: colin glass <cgabcd1...@yahoo.co.uk>; "hackrf-dev@greatscottgadgets.com"
<hackrf-dev@greatscottgadgets.com>
Sent: Monday, 8 May 2017, 15:03
Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the
device
a error of hackrf_info may be because permission problems.
If the device does not show on syslog the problem will be worse.
If your device is show as recognized in syslog, try this
https://github.com/mossmann/hackrf/wiki/FAQ
regards
On 08/05/17 14:36, colin glass wrote:
Thanks Fernando I tend to get this ... hackrf_open() failed:
HACKRF_ERROR_NOT_FOUND (-5)
ubuntu@ubuntu:~/Downloads/hackrf-2017.02.1/firmware-bin$ hackrf_info
No HackRF boards found.
but let me try your script Colin
From: Fernando <ferna...@samara.com.es>
To: colin glass <cgabcd1...@yahoo.co.uk>; "hackrf-dev@greatscottgadgets.com"
<hackrf-dev@greatscottgadgets.com>
Sent: Monday, 8 May 2017, 0:20
Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the
device
if you open a terminal and type
sudo tail -f /var/log/syslog
and then you plug in your hackrf
you should get something like this
May 3 00:34:08 FPGAwars kernel: [202113.781179] usb 3-1: new high-speed USB
device number 11 using xhci_hcd
May 3 00:34:08 FPGAwars kernel: [202114.102805] usb 3-1: New USB device
found, idVendor=1d50, idProduct=6089
May 3 00:34:08 FPGAwars kernel: [202114.102810] usb 3-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=4
May 3 00:34:08 FPGAwars kernel: [202114.102812] usb 3-1: Product: HackRF One
May 3 00:34:08 FPGAwars kernel: [202114.102813] usb 3-1: Manufacturer: Great
Scott Gadgets
May 3 00:34:08 FPGAwars kernel: [202114.102815] usb 3-1: SerialNumber:
000000000000000071c469c825671743
May 3 00:34:12 FPGAwars mtp-probe: checking bus 3, device 11:
"/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb3/3-1"
May 3 00:34:12 FPGAwars mtp-probe: bus: 3, device: 11 was not an MTP device
regards
On 08/05/17 00:15, colin glass wrote:
gnuradio bootable from a memory stick.... I have tried to access it via W10
and Zaddig too ...
From: Fernando <ferna...@samara.com.es>
To: hackrf-dev@greatscottgadgets.com
Sent: Sunday, 7 May 2017, 22:38
Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the
device
What operating system are you using?
On 07/05/17 22:49, colin glass via HackRF-dev wrote:
So I have had my hackers for 3 months and it sat in a box. I plugged it
into my laptop and tried a variety of ways to talk to hit via USB including a
powered USB.
However, I am worried I simply have a brick as I cannot flash the device and
therefore cannot access and use all its wonderful features!
Any help/thoughts/advice?
thanks so much 73's M0HYH Colin
_______________________________________________
HackRF-dev mailing list
HackRF-dev@greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
_______________________________________________
HackRF-dev mailing list
HackRF-dev@greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
_______________________________________________
HackRF-dev mailing list
HackRF-dev@greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
