Yes it does. I have it working on GNU radio companion. Tonight I found one station… with or without averaging set and using the default flowchart in Mike’s website tutorial – background is about -80 dB and I can finally see and see some FM signals. With 10MHz span (95-105 MHz) I see a wide broad signal extending from about 98.5 to 101.5 MHz with some signal spikes riding on top to about -55dB.
Jerry From: vk4...@tech-software.net [mailto:vk4...@tech-software.net] Sent: Monday, July 10, 2017 7:01 PM To: 'Jerry Stern' <jster...@att.net>; hackrf-dev@greatscottgadgets.com Subject: RE: [Hackrf-dev] Is my new (old) HackRF Deaf? Does SDR# find and run the hack RF ? From: HackRF-dev [mailto:hackrf-dev-boun...@greatscottgadgets.com] On Behalf Of Jerry Stern Sent: Tuesday, 11 July 2017 6:54 AM To: hackrf-dev@greatscottgadgets.com <mailto:hackrf-dev@greatscottgadgets.com> Subject: [Hackrf-dev] Is my new (old) HackRF Deaf? Is my HackRF deaf? I am a ham radio hobbyist and I bought a HackRF One to enhance my deeper learning of SDR but also as a broadband RF source. To my dismay, installing the software has become days of learning Ubuntu basics and dealing with instructions that are at times outdated or nuanced towards a person with much more than basic Linux skills. So, I gave up on Ubuntu only because it was faster for me to install and test with Windows 7. My HackRF One (GreatScott) must have been a leftover as the firmware was dated 2014(August). I installed the latest version HackRF tools and updated the firmware to Feb 2017. I followed Mike's video tutorial for creating a basic GNU flow for FM and also installed SDR#. I have very strong FM broadcast stations in my area which I can easily demodulate with my Rigol Spectrum analyzer using the ANT500. However both with GNU and SDR# my HackRF appears deaf in FM broadcast mode. I read that a few years back there may have been some issues with cold solder joints on the HackRF pcb.... I have a lot of test equipment - from RF generators up to 2 GHz, etc but before I go that route is there something I am perhaps missing in my setup. Not sure where or what details to provide here without overloading my question further Thanks Jerry Sent from my iPhone
_______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
