Hi Andrew, Is the HackRF permanently in this state? Or does it switch from responding to hackrf_info to not responding only after you try using hackrf_transfer?
Thanks, Dominic On 21 May 2018 at 16:43, Andrew Onyshchuk <andryk...@gmail.com> wrote: > Hi everyone. > > My hackrf one suddenly stopped working. > When I try rx (or tx) I don't receive any samples and hackrf stops > responding/ all 6 LED are on. > Flashing different firmware doesn't help (using DFU as well). > Same on different computers and different cables. > The md5 of firmware from the device matches the .bin file. > > $ hackrf_info > hackrf_info version: git-90d3f7f > libhackrf version: git-90d3f7f (0.5) > Found HackRF > Index: 0 > Serial number: 000000000000000014d463dc2fa077e1 > Board ID Number: 2 (HackRF One) > Firmware Version: 2018.01.1 (API:1.02) > Part ID Number: 0xa004cb3c 0x005e4f3e > > $ hackrf_transfer -f 415000000 -r /dev/null > call hackrf_set_sample_rate(10000000 Hz/10.000 MHz) > call hackrf_set_freq(415000000 Hz/415.000 MHz) > Stop with Ctrl-C > 0.0 MiB / 1.003 sec = 0.0 MiB/second > > Couldn't transfer any bytes for one second. > > Exiting... hackrf_is_streaming() result: HACKRF_TRUE (1) > Total time: 1.00293 s > > $ hackrf_info > hackrf_info version: git-90d3f7f > libhackrf version: git-90d3f7f (0.5) > Found HackRF > Index: 0 > hackrf_board_id_read() failed: Input/Output Error (-1000) > > Looks like a hardware failure? > > Thanks in advance for any suggestions/assistance > > _______________________________________________ > HackRF-dev mailing list > HackRF-dev@greatscottgadgets.com > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > >
_______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
