Thanks Ben for you reply.
Your solution is OK if all the backends are known.

But what I want is  don't need to config the acl at all, and haproxy will
proxy the request to the correct backend.

I know haproxy should be patched.

Willy,  do you have any plan to add such feature into haproxy?


BR,
DeltaY

2011/4/2 Ben Timby <[email protected]>:
> On Fri, Apr 1, 2011 at 12:24 PM, Delta Yeh <[email protected]> wrote:
>> Hi all,
>>  When setting up a web hosting service with haproxy, there is a requirement.
>> The case is :
>> client----nginx-------haproxy---------------wwws
>>
>> client :1.1.1.1
>> nginx  2.2.2.1
>> haorxy:2.2.2.2
>> wwws:3.3.3.1
>>
>> nginx sit between client and  haproxy, haproxy work in transparnt mode.
>>
>> client send request to  www.abc.com( 3.3.3.1) ,the request is redirect
>> to nginx box.
>> nginx get the original server 3.3.3.1 and add a header  
>> x-original-to:3.3.3.1 ,
>> nginx proxy request to haproxy, haproxy proxy request to the original
>> www server 3.3.3.1 specified in http header "x-original-to"
>>
>>
>> the config fragment of haproxy may like:
>>
>> backend wwws
>>        mode http
>>        server  virtual-host-server  0.0.0.0 addr_header x-original-to
>>        source 0.0.0.0 usesrc hdr_ip(x-forwarded-for,-1)
>>
>>
>> so server option "addr_header x-original-to" tell haproxy  the real
>> www server address to be connected to is
>> specified in header "x-original-to"
>>
>> So my question is it possible for haproxy to do this?
>
> Someone else can correct me if I am wrong, but I don't think this will
> work exactly as described. However, a similar method that would work
> if you have a number of known backends is to use acls to route the
> request.
>
> Given two possible backends:
>
> www1: 3.3.3.1
> www2: 3.3.3.2
>
> A configuration like:
>
> listen http
>    bind        2.2.2.2:80
>    mode        http
>    option      httplog
>    balance     roundrobin
>    acl           use-www1 hdr(x-original-to) 3.3.3.1
>    acl           use-www2 hdr(x-original-to) 3.3.3.2
>    use_backend www1 if use-www1
>    use_backend www2 if use-www2
>    server      www1 3.3.3.1:80
>    server      www2 3.3.3.2:80
>
> The acl will be set to true when the IP address matches that of the
> backend. The acl then determines which backend to use. You would have
> to write an acl and use_backend rule for each backend. It would not
> work for arbitrary backends.
>

Reply via email to