Hi,
On 12.02.2012 12:54, Baptiste wrote:
lukasz<at>jagiello<dot>org
Hi,
When speaking about virtualization, there are so many factors to take
into account.
- which hypervisor are we speaking about ?
VMWare ESXi 5.0
- what phisical NIC are using?
Broadcom Corporation Broadcom NetXtreme II BCM5716 1000Base-T
- have you reserved both CPU and memory resources dedicated to the LB VM?
Yes
- 2 vCPUs may be counter-productive, try with a single one
- what kind of platform is this, which protocols, etc...
FreeBSD based, PFSense 2.0
- some top command output may be interresting too
####################################################################################################
last pid: 4417; load averages: 0.39, 0.39, 0.41 up 0+03:06:53
13:16:47
43 processes: 1 running, 42 sleeping
CPU: 0.7% user, 0.0% nice, 3.7% system, 3.9% interrupt, 91.6% idle
Mem: 143M Active, 13M Inact, 86M Wired, 23M Buf, 239M Free
Swap: 256M Total, 256M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
21153 www 1 50 0 78168K 53488K kqread 0 1:05 9.96% haproxy
20994 www 1 48 0 75096K 51084K kqread 0 0:56 6.98% haproxy
47172 root 1 45 0 4948K 2536K select 0 6:30 1.95% syslogd
28115 root 1 76 0 43356K 17136K accept 1 0:06 0.00% php
11387 root 1 45 0 43356K 18416K accept 0 0:06 0.00% php
45128 root 1 44 0 3316K 924K piperd 1 0:04 0.00% logger
44876 root 1 44 0 7960K 4736K bpf 0 0:04 0.00% tcpdump
51723 root 1 44 0 3316K 1344K select 0 0:03 0.00% apinger
61582 root 1 44 0 43356K 16932K accept 0 0:02 0.00% php
60511 root 1 47 0 43356K 18248K accept 1 0:02 0.00% php
56598 root 1 44 0 6724K 3476K kqread 1 0:01 0.00% lighttpd
13054 root 1 44 0 5988K 3968K select 1 0:01 0.00% racoon
15747 root 1 76 20 3656K 1492K wait 0 0:01 0.00% sh
13628 root 1 44 0 8232K 6776K select 0 0:00 0.00% bsnmpd
6216 root 1 44 0 7992K 3556K select 0 0:00 0.00% sshd
3474 _ntp 1 44 0 3316K 1348K select 1 0:00 0.00% ntpd
4002 root 1 44 0 7992K 3496K select 1 0:00 0.00% sshd
####################################################################################################
last pid: 44224; load averages: 0.52, 0.42, 0.42 up 0+03:07:23
13:17:17
45 processes: 2 running, 43 sleeping
CPU: 3.2% user, 0.0% nice, 15.2% system, 28.3% interrupt, 53.4% idle
Mem: 145M Active, 13M Inact, 86M Wired, 23M Buf, 237M Free
Swap: 256M Total, 256M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
21153 www 1 49 0 78168K 54228K RUN 1 1:08 8.98% haproxy
20994 www 1 48 0 75096K 51628K kqread 0 0:58 7.96% haproxy
47172 root 1 45 0 4948K 2536K select 1 6:31 1.95% syslogd
28115 root 1 76 0 43356K 17136K accept 0 0:06 0.00% php
11387 root 1 44 0 43356K 18416K accept 0 0:06 0.00% php
45128 root 1 44 0 3316K 924K piperd 1 0:04 0.00% logger
44876 root 1 44 0 7960K 4740K bpf 1 0:04 0.00% tcpdump
51723 root 1 44 0 3316K 1344K select 0 0:03 0.00% apinger
61582 root 1 44 0 43356K 16932K accept 0 0:02 0.00% php
60511 root 1 47 0 43356K 18248K accept 1 0:02 0.00% php
56598 root 1 44 0 6724K 3476K kqread 0 0:01 0.00% lighttpd
13054 root 1 44 0 5988K 3968K select 1 0:01 0.00% racoon
15747 root 1 76 20 3656K 1492K wait 0 0:01 0.00% sh
13628 root 1 44 0 8232K 6776K select 1 0:00 0.00% bsnmpd
####################################################################################################
last pid: 62088; load averages: 0.37, 0.39, 0.41 up 0+03:07:43
13:17:37
43 processes: 1 running, 42 sleeping
CPU: 0.0% user, 0.0% nice, 1.5% system, 3.7% interrupt, 94.8% idle
Mem: 146M Active, 13M Inact, 86M Wired, 23M Buf, 236M Free
Swap: 256M Total, 256M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
21153 www 1 50 0 80216K 55464K kqread 0 1:10 9.96% haproxy
20994 www 1 48 0 75096K 52084K kqread 0 1:00 8.98% haproxy
47172 root 1 45 0 4948K 2536K select 0 6:32 0.98% syslogd
28115 root 1 76 0 43356K 17136K accept 0 0:06 0.00% php
11387 root 1 45 0 43356K 18416K accept 0 0:06 0.00% php
45128 root 1 44 0 3316K 924K piperd 0 0:04 0.00% logger
44876 root 1 44 0 7960K 4740K bpf 0 0:04 0.00% tcpdump
51723 root 1 44 0 3316K 1344K select 1 0:03 0.00% apinger
61582 root 1 44 0 43356K 16932K accept 1 0:02 0.00% php
60511 root 1 47 0 43356K 18248K accept 1 0:02 0.00% php
56598 root 1 44 0 6724K 3476K kqread 1 0:01 0.00% lighttpd
13054 root 1 44 0 5988K 3968K select 0 0:01 0.00% racoon
15747 root 1 76 20 3656K 1492K wait 0 0:01 0.00% sh
13628 root 1 44 0 8232K 6776K select 1 0:00 0.00% bsnmpd
6216 root 1 44 0 7992K 3556K select 0 0:00 0.00% sshd
####################################################################################################
last pid: 62088; load averages: 0.37, 0.39, 0.41 up 0+03:07:43
13:17:37
43 processes: 1 running, 42 sleeping
CPU: 0.0% user, 0.0% nice, 1.5% system, 3.7% interrupt, 94.8% idle
Mem: 146M Active, 13M Inact, 86M Wired, 23M Buf, 236M Free
Swap: 256M Total, 256M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
21153 www 1 50 0 80216K 55464K kqread 0 1:10 9.96% haproxy
20994 www 1 48 0 75096K 52084K kqread 0 1:00 8.98% haproxy
47172 root 1 45 0 4948K 2536K select 0 6:32 0.98% syslogd
28115 root 1 76 0 43356K 17136K accept 0 0:06 0.00% php
11387 root 1 45 0 43356K 18416K accept 0 0:06 0.00% php
45128 root 1 44 0 3316K 924K piperd 0 0:04 0.00% logger
44876 root 1 44 0 7960K 4740K bpf 0 0:04 0.00% tcpdump
51723 root 1 44 0 3316K 1344K select 1 0:03 0.00% apinger
61582 root 1 44 0 43356K 16932K accept 1 0:02 0.00% php
60511 root 1 47 0 43356K 18248K accept 1 0:02 0.00% php
56598 root 1 44 0 6724K 3476K kqread 1 0:01 0.00% lighttpd
13054 root 1 44 0 5988K 3968K select 0 0:01 0.00% racoon
15747 root 1 76 20 3656K 1492K wait 0 0:01 0.00% sh
13628 root 1 44 0 8232K 6776K select 1 0:00 0.00% bsnmpd
6216 root 1 44 0 7992K 3556K select 0 0:00 0.00% sshd
####################################################################################################
- which version of haproxy? have you compiled it from sources or is
1.4.18 Package of the Pfsense bundle
this the one from your distro?
- are you using client side keepalives?
No
and any kind of information which may help.
I use nginx on my backend servers
As you can see, saying you have performance issues without giving a
minimal set of information prevent us from helping you accurately.
Thank you for trying to help me, sorry for the minimal information I
gave you.
Right now I don't know which information I could give furthermore.
--
Sebastian Fohler
Far-Galaxy Networks
Web: http://www.far-galaxy.de
Tel.: +49 (0)173 8796211
E-Mail: [email protected]
