You should have a new HAProxy process started using the new configuration and binding the ports...
cheers On 2/7/13, Eugene Istomin <e.isto...@edss.ee> wrote: > Thanks for the answer, > > as written in > http://www.mgoff.in/2010/04/18/haproxy-reloading-your-config-with- > minimal-service-impact/ > "The end-result is a reload of the configuration file which is not visible > by > the customer" > > But in our case it leads to unbinding from all ports and finishing haproxy > process. > Can this issue related to rpm build options? RPM build log is > https://build.opensuse.org/package/rawlog?arch=x86_64&package=haproxy-1.5&project=server%3Ahttp&repository=openSUSE_12.2 > > > -- > Best regards, > Eugene Istomin > > > On Thursday 07 February 2013 07:28:17 Willy Tarreau wrote: >> Hello Eugene, >> >> On Wed, Feb 06, 2013 at 08:29:33PM +0200, Eugene Istomin wrote: >> > Hello, >> > >> > We have problem with reload/HUP: >> > if i run #/usr/sbin/haproxy -D -f /etc/haproxy/haproxy.cfg -p >> > /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid) - haproxy process >> > is >> > shutting down and exit >> >> This is the intended behaviour, it unbinds from its ports so that the new >> process can bind, then waits for all existing connections to terminate >> and leaves. Isn't it what you're observing ? What would you have expected >> instead ? >> >> Willy