Hey Muhammad, On 08/24/2013 01:51 PM, Muhammad Ammad Shah wrote: > Hi, > > is there any command line interface for haproxy to view failed or active > servers. > > Thanks, > Muhammad Ammad Shah
www_test_foo,local_www,0,0,0,1,768,2,176,326,,0,,0,0,0,0,UP,100,1,0,0,1,3507,145,,1,4,1,,2,,2,0,,1,L4OK,,0,0,0,0,2,0,0,0,,,,0,0,,,,, www_test_bar,local_www,0,0,0,1,768,1,89,163,,0,,0,0,0,0,UP,100,1,0,0,1,3506,145,,1,5,1,,1,,2,0,,1,L4OK,,0,0,0,0,1,0,0,0,,,,0,0,,,,, testback,localredis-1,0,0,0,0,768,0,0,0,,0,,0,0,0,0,UP,100,1,0,0,0,3652,0,,1,6,1,,0,,2,0,,0,L4OK,,0,,,,,,,0,,,,0,0,,,,, testback,localredis-2,0,0,0,0,768,0,0,0,,0,,0,0,0,0,DOWN,100,0,1,0,1,3649,3649,,1,6,2,,0,,2,0,,0,INI,,,,,,,,,0,,,,0,0,,,,, testback_mysql,localmysql-1,0,0,0,0,768,0,0,0,,0,,0,0,0,0,DOWN,100,1,0,0,1,3648,3648,,1,7,1,,0,,2,0,,0,L4CON,,0,,,,,,,0,,,,0,0,,,,, This is just an example using (e)grep and should be used just for demonstration. You should use awk or something to check if the specified field is 'DOWN'/'UP'/etc. and then do the logic based on that. You can find more information about socket commands in section 9.2 of the HAproxy manual (http://haproxy.1wt.eu/download/1.5/doc/configuration.txt). Regards, -- Nenad Merdanovic | PGP: 0x423edcb2 | Web: http://nimzo.info Linkedin: http://www.linkedin.com/in/nenadmerdanovic
