FWIW, these are the two lines I added to the /boot/loader.conf file hw.bge.tso_enable=0 hw.pci.enable_msix=0
On Sun, Oct 4, 2015 at 12:09 PM, Daren Sefcik <dsef...@hightechhigh.org> wrote: > On Sun, Oct 4, 2015 at 7:30 AM, joris dedieu <joris.ded...@gmail.com> > wrote: > >> Broadcom NICs : you should check man 4 bge and >> https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards >> > > While I had already looked at this early in my troubleshooting process I > totally screwed it up, I have bge cards and instead of changing the "bce" > configurations to "bge" I left them at bce. I changed them just now and was > able to easily achieve these numbers without a wink: > > *pid = *50054 (process #1, nbproc = 1) > *uptime = *0d 0h03m25s > *system limits:* memmax = unlimited; ulimit-n = 100047 > *maxsock = *100047; *maxconn = *50000; *maxpipes = *0 > current conns = 5562; current pipes = 0/0; conn rate = 64/sec > Running tasks: 1/5587; idle = 97 % >