Hi Lukas, I have changed my configurations accordingly and it's working. Thank you very much! Gustavo
On 28 January 2016 at 18:04, Lukas Tribus <[email protected]> wrote: > Hi Gustavo, > > > > > I compiled 1.6.3 from source with the options: TARGET=custom USE_PCRE=1 > > USE_LINUX_SPLICE=1 USE_LINUX_TPROXY=1 USE_OPENSSL=yes > > Unless you have a kernel older than 2.6.28, just use the linux2628 > target: > TARGET=linux2628 USE_PCRE=1 USE_OPENSSL=1 > > This will enable all current kernel optimizations and features, including > splice, tproxy, accept4(), poll and epoll. > > In fact you are probably only using select() right now, which is > pretty bad (check the output of haproxy -vv to make sure). > > I would strongly recommend to recompile, unless performance > doesn't matter. > > > > >> Below is my haproxy.cfg: > > *If* you would use an ancient release (<= 1.5-dev21) that defaults > http-tunnel, http-server-close would indeed be needed, and it would > be missing in the photo_upload_backend backend. > > But since thats not the case, I would suggest you remove > http-server-close completely, and let it fall back to keep-alive for > all http backends. > > Whats seems to be missing though is a "mode http" declaration > in both lighttpd_backend and photo_upload_backend backends. > > That is most likely the reason for your problem. > > > So the recommendation is to configure http mode and keep-alive in the > default section with proper timeouts (this should fix the issue): > default > mode http > option http-keep-alive > option prefer-last-server > timeout tunnel 3600s > timeout http-keep-alive 1s > > Also: > - remove option http-server-close > - recompile with TARGET=linux2628 > - cleanup to make the config more obvious: move default_backend below > use_backend > > > > Regards, > > Lukas > >
