Hello Daniel,
You might be missing the hold-valid directive in your resolvers section: https://www.haproxy.com/documentation/hapee/1-9r1/onepage/#5.3.2-timeout This should force HAProxy to fetch the DNS record values from the resolver. A reload of the HAProxy instance also forces the instances to query all records from the resolver. Can you please retest with the updated configuration and report back the results? Best regards, Bruno Henc ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, March 21, 2019 12:09 PM, Daniel Schneller <[email protected]> wrote: > Hello! > > Friendly bump :) > I'd be willing to amend the documentation once I understand what's going on :D > > Cheers, > Daniel > > > On 18. Mar 2019, at 20:28, Daniel Schneller > > [email protected] wrote: > > Hi everyone! > > I assume I am misunderstanding something, but I cannot figure out what it > > is. > > We are using haproxy in AWS, in this case as sidecars to applications so > > they need not > > know about changing backend addresses at all, but can always talk to > > localhost. > > Haproxy listens on localhost and then forwards traffic to an ELB instance. > > This works great, but there have been two occasions now, where due to a > > change in the > > ELB's IP addresses, our services went down, because the backends could not > > be reached > > anymore. I don't understand why haproxy sticks to the old IP address > > instead of going > > to one of the updated ones. > > There is a resolvers section which points to the local dnsmasq instance > > (there to send > > some requests to consul, but that's not used here). All other traffic is > > forwarded on > > to the AWS DNS server set via DHCP. > > I managed to get timely updates and updated backend servers when using > > server-template, > > but form what I understand this should not really be necessary for this. > > This is the trimmed down sidecar config. I have not made any changes to dns > > timeouts etc. > > resolvers default > > > > dnsmasq > > > > ======== > > > > nameserver local 127.0.0.1:53 > > listen regular > > bind 127.0.0.1:9300 > > option dontlog-normal > > server lb-internal loadbalancer-internal.xxx.yyy:9300 resolvers default > > check addr loadbalancer-internal.xxx.yyy port 9300 > > listen templated > > bind 127.0.0.1:9200 > > option dontlog-normal > > option httpchk /haproxy-simple-healthcheck > > server-template lb-internal 2 loadbalancer-internal.xxx.yyy:9200 resolvers > > default check port 9299 > > To simulate changing ELB adresses, I added entries for > > loadbalancer-internal.xxx.yyy in /etc/hosts > > and to be able to control them via dnsmasq. > > I tried different scenarios, but could not reliably predict what would > > happen in all cases. > > The address ending in 52 (marked as "valid" below) is a currently (as of > > the time of testing) > > valid IP for the ELB. The one ending in 199 (marked "invalid") is an unused > > private IP address > > in my VPC. > > Starting with /etc/hosts: > > 10.205.100.52 loadbalancer-internal.xxx.yyy # valid > > 10.205.100.199 loadbalancer-internal.xxx.yyy # invalid > > haproxy starts and reports: > > regular: lb-internal UP/L7OK > > templated: lb-internal1 DOWN/L4TOUT > > lb-internal2 UP/L7OK > > That's expected. Now when I edit /etc/hosts to only contain the invalid > > address > > and restart dnsmasq, I would expect both proxies to go fully down. But only > > the templated > > proxy behaves like that: > > regular: lb-internal UP/L7OK > > templated: lb-internal1 DOWN/L4TOUT > > lb-internal2 MAINT (resolution) > > Reloading haproxy in this state leads to: > > regular: lb-internal DOWN/L4TOUT > > templated: lb-internal1 MAINT (resolution) > > lb-internal2 DOWN/L4TOUT > > After fixing /etc/hosts to include the valid server again and restarting > > dnsmasq: > > regular: lb-internal DOWN/L4TOUT > > templated: lb-internal1 UP/L7OK > > lb-internal2 DOWN/L4TOUT > > Shouldn't the regular proxy also recognize the change and bring the backend > > up or down > > depending on the DNS change? I have waited for several health check rounds > > (seeing > > "* L4TOUT" and "L4TOUT") toggle, but it still never updates. > > I also tried to have only the invalid address in /etc/hosts, then > > restarting haproxy. > > The regular backends will never recognize it when I add the valid one back > > in. > > The templated one does, unless I set it up to have only 1 instead of 2 > > server slots. > > In that case it behaves will also only pick up the valid server when > > reloaded. > > On the other hand, it will recognize when I remove the valid server without > > a reload > > on the next health check, but not bring them back in and make the proxy UP > > when it > > comes back. > > I assume my understanding of something here is broken, and I would gladly > > be told > > about it :) > > Thanks a lot! > > Daniel > > > > Version Info: > > > > -------------- > > > > $ haproxy -vv > > HA-Proxy version 1.8.19-1ppa1~trusty 2019/02/12 > > Copyright 2000-2019 Willy Tarreau [email protected] > > Build options : > > TARGET = linux2628 > > CPU = generic > > CC = gcc > > CFLAGS = -O2 -g -O2 -fPIE -fstack-protector --param=ssp-buffer-size=4 > > -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fno-strict-aliasing > > -Wdeclaration-after-statement -fwrapv -Wno-unused-label > > OPTIONS = USE_GETADDRINFO=1 USE_ZLIB=1 USE_REGPARM=1 USE_OPENSSL=1 > > USE_LUA=1 USE_PCRE=1 USE_PCRE_JIT=1 USE_NS=1 > > Default settings : > > maxconn = 2000, bufsize = 16384, maxrewrite = 1024, maxpollevents = 200 > > Built with OpenSSL version : OpenSSL 1.0.1f 6 Jan 2014 > > Running on OpenSSL version : OpenSSL 1.0.1f 6 Jan 2014 > > OpenSSL library supports TLS extensions : yes > > OpenSSL library supports SNI : yes > > OpenSSL library supports : SSLv3 TLSv1.0 TLSv1.1 TLSv1.2 > > Built with Lua version : Lua 5.3.1 > > Built with transparent proxy support using: IP_TRANSPARENT IPV6_TRANSPARENT > > IP_FREEBIND > > Encrypted password support via crypt(3): yes > > Built with multi-threading support. > > Built with PCRE version : 8.31 2012-07-06 > > Running on PCRE version : 8.31 2012-07-06 > > PCRE library supports JIT : no (libpcre build without JIT?) > > Built with zlib version : 1.2.8 > > Running on zlib version : 1.2.8 > > Compression algorithms supported : identity("identity"), > > deflate("deflate"), raw-deflate("deflate"), gzip("gzip") > > Built with network namespace support. > > Available polling systems : > > epoll : pref=300, test result OK > > poll : pref=200, test result OK > > select : pref=150, test result OK > > Total: 3 (3 usable), will use epoll. > > Available filters : > > [SPOE] spoe > > [COMP] compression > > [TRACE] trace > > -- > > Daniel Schneller > > Principal Cloud Engineer > > CenterDevice GmbH > > Rheinwerkallee 3 > > 53227 Bonn > > www.centerdevice.com > > > > Geschäftsführung: Dr. Patrick Peschlow, Dr. Lukas Pustina, Michael Rosbach, > > Handelsregister-Nr.: HRB 18655, HR-Gericht: Bonn, USt-IdNr.: DE-815299431 > > Diese E-Mail einschließlich evtl. beigefügter Dateien enthält vertrauliche > > und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige > > Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie > > bitte sofort den Absender und löschen Sie diese E-Mail und evtl. > > beigefügter Dateien umgehend. Das unerlaubte Kopieren, Nutzen oder Öffnen > > evtl. beigefügter Dateien sowie die unbefugte Weitergabe dieser E-Mail ist > > nicht gestattet.
