Sorry, not sure if you can help me but I thought I'd give it a try. I am trying to control a lowe HF-150 using Smart Lowe Control 32 (version 3.23). The HF-150 is connected to an IBM computer running Windows 95 via the parallel port. I believe that I have the COMS setting on the computer incorrectly set but am unsure what the proper settings are for the IBM/Smart Lowe Control Settings.
Do you know of anyone who might be of help? Mark Fine has already replied that the software is no longer supported and that the COMS setup is the likely suspect. Thanks, Ed ---[Start Commercial]--------------------- Check out HCDX 2.0 beta: http://www.hard-core-dx.com/index.php ---[End Commercial]----------------------- ________________________________________ Hard-Core-DX mailing list [EMAIL PROTECTED] http://www2.hard-core-dx.com/mailman/listinfo/hard-core-dx http://www.hard-core-dx.com/ _______________________________________________ THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed and/or modified under the conditions set down in the Design Science License published by Michael Stutz at http://dsl.org/copyleft/dsl.txt
