Hello I am using the 1025 and several years ago after reading a mesage i thionk in this list i removed one resistor on the RF input for better usage on the MW band However the 1025 is now overloading and have to revert it back to its original design . But all older mesages from one year ago and before have been deleted due to the servicemen's carelessness What is the resistor( number and resistance) ? ------ Please do not send mesages above 400 kB Zacharias Liangas , Thessaloniki Greece greekdx @ otenet dot gr --- www.geocities.com/zliangas Pesawat penerima: ICOM R75 , Lowe HF150 , Degen 1102,1103,108, Tecsun PL200, Chibo c300/c979, Yupi 7000 Antenna: 16m hor, 2x16 m V invert, 1m australian loop
---[Start Commercial]--------------------- World Radio TV Handbook 2005 is out. Order yours from http://www.amazon.com/exec/obidos/ASIN/0823077942/hardcoredxcom ---[End Commercial]----------------------- ________________________________________ Hard-Core-DX mailing list [email protected] http://dallas.hard-core-dx.com/mailman/listinfo/hard-core-dx http://www.hard-core-dx.com/ _______________________________________________ THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed and/or modified under the conditions set down in the Design Science License published by Michael Stutz at http://dsl.org/copyleft/dsl.txt
