By all means phase two SAL's or similar if you have room. How far apart can you place them? 73 KAZ
On Sat, Jul 7, 2018 at 6:22 PM, Brandon Jordan <[email protected]> wrote: > Hi Colin. I missed this post somehow but, since seeing it, thought I > should respond. I own both the NCC-1 and NCC-2. I actually thought I sold > the NCC-1 last year on eBay but obviously did not as I just found it boxed > up in my radio room closet. > > I have way more experience with the NCC-1, mainly phasing dual DXE active > whips. I bought the NCC-2 from a ham who couldn’t figure out how to use it, > but unfortunately since I put it online after a few months of being boxed, > I don’t have any output out of antenna 2 so it is going to DXE for repair. > Long story short, no experience with the NCC-2 besides a few days of > testing when it first arrived. The NCC-1 worked great on two DXE active > whips spaced 100’ apart. > > I have been so enamored with the Shared Apex Loop that regular phasers > have been a bit on the back-burner and why I am now very interested in your > new model. In speaking with the SAL guru Mark Bauman about dimensions on a > SAL-35, he mentioned phasing two SAL’s could be very interesting and since > I happen to have two SAL units I am planning on experimenting with that. I > have the post holes dug, the 35’ masts aluminum masts built and etc ready > to go but don’t see me getting those up until it cools off some here in TN. > > 73, > Brandon > > > On Jun 30, 2018, at 12:15 PM, R. Colin Newell <[email protected]> > wrote: > > > > DXE NCC-2 or with its predecessor, NCC-1. PHASERS- > > > > Who among you have used this for DXing? > > > > Appreciate all comments. > > > > > > Colin Newell - Victoria - B.C. CANADA - > > DXER.ca ——— > > _______________________________________________ > > IRCA mailing list > > [email protected] > > http://montreal.kotalampi.com/mailman/listinfo/irca > > > > Opinions expressed in messages on this mailing list are those of the > original contributors and do not necessarily reflect the opinion of the > IRCA, its editors, publishing staff, or officers > > > > For more information: http://www.ircaonline.org > > > > To Post a message: [email protected] > > > _______________________________________________ > IRCA mailing list > [email protected] > http://montreal.kotalampi.com/mailman/listinfo/irca > > Opinions expressed in messages on this mailing list are those of the > original contributors and do not necessarily reflect the opinion of the > IRCA, its editors, publishing staff, or officers > > For more information: http://www.ircaonline.org > > To Post a message: [email protected] > > _ Hard-Core-DX mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx http://www.hard-core-dx.com/ _______________________________________________ THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed and/or modified under the conditions set down in the Design Science License published by Michael Stutz at http://www.gnu.org/licenses/dsl.html
