I wondered about that as I vaguely recall they were only planning a 90
meters & possibly 120 meters short-wave service.  Obviously there are some
tune-up issues to be resolved.

Mike

On Wed, Apr 14, 2021 at 1:50 PM Paul B. Walker, Jr. <
walkerbroadcast...@gmail.com> wrote:

> apparently 11835 is a HARMONIC! yIKES!
>
> i NEED TO CHECK IF I CAN HEAR 3945 TONIGHT.. I HAVE YET TO HEAR 7260!
>
> On Wed, Apr 14, 2021 at 12:49 PM Mike Cherry <mikeche...@telus.net> wrote:
>
>> That's a nice catch Paul.  R Vanuatu's short-wave service was
>> re-activated only recently having been off air for some time.  I believe
>> they also did an overhaul on their MW facility with new higher powered
>> transmitter & plans afoot to add one possibly two more MW signals to serve
>> the remote, widely scattered population
>>
>> Mike
>>
>> On Wed, Apr 14, 2021 at 12:43 AM Paul B. Walker, Jr. <
>> walkerbroadcast...@gmail.com> wrote:
>>
>>> 2.5KW ND 11835khz pretty decently audible from 0700UTC onwards (that’s
>>> when I started checking). SINPO:  45344. McGrath AK with Tecsun PL880c DXE
>>> preamp and Doxytronics tunable loop
>>
>>
>>
>> --
>> *Mike Cherry  V E 7 S K A*
>> Salt Spring Island BC - gridsquare: CN88gt
>>
>> Icom R75 Drake R8 Panasonic RF-2200 Sony ICF7600GR GE Superadio III
>> 2 end-fed slopers, 1 end-fed WOG, DeBock Ferrite Sleeve Loop (FSL)
>> Misek/Lankford/Newell phaser
>>
>> *"Medium Wave - The Final Frontier!"*
>>
>>

-- 
*Mike Cherry  V E 7 S K A*
Salt Spring Island BC - gridsquare: CN88gt

Icom R75 Drake R8 Panasonic RF-2200 Sony ICF7600GR GE Superadio III
2 end-fed slopers, 1 end-fed WOG, DeBock Ferrite Sleeve Loop (FSL)
Misek/Lankford/Newell phaser

*"Medium Wave - The Final Frontier!"*
_
Hard-Core-DX mailing list
Hard-Core-DX@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html

Reply via email to