My router uses the term "DMZ" to indicate a computer 'outside the firewall.' It means that any signal that would otherwise be blocked is automatically sent to the DMZ computer.
You might have a problem if your computer gets a new IP address from the router every time it boots up (i.e. dynamic IP addressing), as you would have to change the IP address of the DMZ computer each time. Kevin --- "Nancy E. Anthracite" <[EMAIL PROTECTED]> wrote: > I think I can guess how you are set up. The only > way to access a VistA server > over the Internet that I know of is if it is outside > the fire wall. When you > have your router connected instead of connecting > directly to your modem, you > are inside a firewall and do not have a routable IP. > Most routers have a > setting to allow you to put your individual computer > outside of the firewall. > find out your computers IP, if it is a Linux machine > use /sbin/ifconfig and > if a Windows machine use Strart- Run-CMD-IPconfig > and find your IP, something > like 192.168.0.101 and then configure your router to > put that outside of the > firewall. Hopefully, the individual computer has a > software firewall > installed that you can configure to have an opening > only for CPRS so that > your computer is not vulnerable to attack. > > On Thursday 13 January 2005 08:26 am, MARCIA > MCKINZIE wrote: > > Hi, I am new to hardhats, and just learning VistA > software, although I have > > been programming in M for quite a while. > > > > My question has to due with CPRS and Delphi > errors. I am working on VistA > > over an internet connection. I am encountering a > couple of problems. > > > > 1.) I can access CPRS as long as my router is > disconnected, but when my > > router (netgear wireless G) is connected I get a > timeout error > > (WSAETIMEDOUT) and don't even get connected to > enter an access/verification > > code. Is there some security setting that > interferes with CPRS? My router > > currently has the following protocols: NAT, SPI, > DoS, IDS, WEP encryption > > and some other wireless security. > > > > 2.) I get an error trying to access some > templates. When I get into CPRS > > and click on the notes tab and then the templates > section. When I click on > > some templates an error comes up and my window is > closed. Following is the > > error message: Error encountered. Function was: > recv Error was: 10107 > > and when I hit OK button I get the following error > Error encountered. > > Function was: recv Error was: 6. Sometimes I get > the message invalid > > pointer error. > > > > Thank you for your help. > > > > Marcia McKinzie > > > > > > > > > > > ------------------------------------------------------- > > The SF.Net email is sponsored by: Beat the > post-holiday blues > > Get a FREE limited edition SourceForge.net t-shirt > from ThinkGeek. > > It's fun and FREE -- well, > almost....http://www.thinkgeek.com/sfshirt > > _______________________________________________ > > Hardhats-members mailing list > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/hardhats-members > > -- > Nancy Anthracite > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the > post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt > from ThinkGeek. > It's fun and FREE -- well, > almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > Hardhats-members mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/hardhats-members > __________________________________ Do you Yahoo!? Yahoo! Mail - You care about security. So do we. http://promotions.yahoo.com/new_mail ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Hardhats-members mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hardhats-members
