My guess it that you didn't have any problems only because you put UCI in all
the places that needed UCI and VOL in all of the places that needed VOL. Had
you called whatever was in UCI in the VistA you started with, and VOL what
was in the VOL, you would have had to have changed it in fewer places. I
think the key is always with D GETENV^%ZOSV and then setting all of the
parameters correctly with NO TYPOS and all that good stuff the first time
around. At the risk of being a broken record, that happens to be broken in
the same place as Lloyd's record that broke from all the times he used it to
tell me to do this ...
VISTA>D GETENV^%ZOSV
VISTA>W Y
Which give you in the output in the respective places:
UCI^VOL^NODE^BOX:VOLUME
This is actually written right into VistA at one of the ?? points, although I
don't recall which one.
Although I have not done configuration, I sure have had lots of chances to
help people with installations, and this is where all of the problems are.
Lloyd knows it so well, he can even tell by the error message where the typos
are. Now that is what I call "experienced"!
On Saturday 29 January 2005 04:26 pm, Kevin Toppenberg wrote:
> For what it is worth, it seems that most of the
> problems that I have hear people talk about on this
> board in regards to taskman, is a problem with the
> VOL,UCI etc. issue. Most recommend using the defaults
> provided by the system, but it seems that this leads
> poeple to problems. I cleared out all the other
> entries, and called my UCI "UCI", and called my VOL,
> "VOL". It seems like I haven't had the problems that
> others have...
>
> Kevin
>
> --- Nick James <[EMAIL PROTECTED]> wrote:
> > Hi
> > The CPRS problem was due to the change in file
> > access
> > rights. That has been solved. But the "Waiting for a
> > partition" problem, does not seem to be over yet.
> > Nick
> >
> > --- Kevin Toppenberg <[EMAIL PROTECTED]> wrote:
> > > Nick,
> > >
> > > Do you have a way to make your server accessible
> >
> > on
> >
> > > the internet for someone else to poke around on?
> > >
> > > I'd be willing to look at it for a couple of
> >
> > minutes
> >
> > > if you want to contact me off-board.
> > >
> > > I'm self taught, so no promises as to whether or
> >
> > not
> >
> > > I
> > > can get you up.
> > >
> > > Kevin
> > > [EMAIL PROTECTED]
> > >
> > > --- Nick James <[EMAIL PROTECTED]> wrote:
> > > > Hi
> > > > I was able to overcome the previous problem with
> > >
> > > the
> > >
> > > > command GO^XMKPLQ and GO^XMTDT, to run
> > > >
> > > > the "MOVER" and "TICKLER".
> > > > But still I was unable to send and receive
> > >
> > > messages.
> > >
> > > > So I just checked to see the tasks
> > > >
> > > > running in TASKMAN, whose screen shot I am
> >
> > giving
> >
> > > > below :
> > > >
> > > > 510: ^LRCAPPH, COLLECT PHLEBOTOMY CAP WORKLOAD.
> > >
> > > No
> > >
> > > > device. VAH,ROU.
> > > > From 1/24/2005 at 18:14, By you. Waiting
> > >
> > > for
> > >
> > > > a
> > > > partition.
>
> ---------------------------------------------------------------------------
>----
>
> > > > 511: ^LRCAPBB, COLLECT BLOOD BANK WORKLOAD. No
> > > > device. VAH,ROU.
> > > > From 1/24/2005 at 18:14, By you. Waiting
> > >
> > > for
> > >
> > > > a
> > > > partition.
> > > >
> > > > .......
> > > >
> > > > 720: GO^XMTDL, MailMan: Message Delivery Queue
> >
> > 1.
> >
> > > > No
> > > > device. ROU,ROU.
> > > > From Today at 11:49, By you. Waiting for
> >
> > a
> >
> > > > partition.
>
> ---------------------------------------------------------------------------
>----
>
> > > > 721: GO^XMTDL, MailMan: Message Delivery Queue
> >
> > 1.
> >
> > > > No
> > > > device. ROU,ROU.
> > > > From Today at 11:50, By you. Waiting for
> >
> > a
> >
> > > > partition.
>
> ---------------------------------------------------------------------------
>----
>
> > > > 722: GO^XMTDL, MailMan: Message Delivery Queue
> >
> > 1.
> >
> > > > No
> > > > device. ROU,ROU.
> > > > From Today at 11:51, By you. Waiting for
> >
> > a
> >
> > > > partition.
> > > > ......
> > > >
> > > >
> > > >
> > > > ROU,ROU is th valid UCI,VOL pair.
> > > >
> > > > I tried to update the DEFAULT PARTITION SIZE, in
> > > > TASKMAN SITE PARAMETERS, to 500. But it
> > > >
> > > > didn't seem to make any difference. So I tried
> >
> > to
> >
> > > > DELETE TASKS and CLEAN TASK FILE and
> > > >
> > > > CLEANUP TASK LIST options. And finally I have
> > >
> > > landed
> > >
> > > > with the following problems in CPRS.
> > > >
> > > > ---------------------------
> > > > CPRS - Patient Chart
> > > > ---------------------------
> > > > Access violation at address 00404B6B in module
> > > > 'CPRSChart23.exe'. Read of address 0107C055.
> > > > ---------------------------
> > > > OK
> > > > ---------------------------
> > > >
> > > > It does not selection of a patient.
> > > >
> > > >
> > > >
> > > > On ordering new medication
> > > > ---------------------------
> > > > Server Error
> > > > ---------------------------
> > > > An error occurred on the server.
> > > > ---------------------------
> > > > OK
> > > > ---------------------------
> > > >
> > > >
> > > >
> > > > After selecting provider
> > > > ---------------------------
> > > > Server Error
> > > > ---------------------------
> > > > An error occurred on the server.M
> > > > ERROR=ENCTITL+3^ORWPT, Null subscripts are not
> > > > allowed
> > > >
> > > >
> > > > for region:
> >
> > DEFAULT,150373498,-%GTM-E-NULSUBSCLAST
> >
> > > > REF=^DPT("",.101)
> > > > ---------------------------
> > > > OK
> > > > ---------------------------
> > > >
> > > > ---------------------------
> > > > Server Error
> > > > ---------------------------
> > > > An error occurred on the server.
> > > > ---------------------------
> > > > OK
> > > > ---------------------------
> > > >
> > > > ---------------------------
> > > > Unable to Lock
> > > > ---------------------------
> > > > Invalid patient
> > > > ---------------------------
> > > > OK
> > > > ---------------------------
> > > >
> > > > Can somebody please help me out.
> > > >
> > > > Regards
> > > > Nick
> > > >
> > > > --- Nick James <[EMAIL PROTECTED]> wrote:
> > > > > Hi
> > > > >
> > > > > The taskman seems to be running but still the
> > > > > "Background Filer" is not running. I have made
> > > > >
> > > > >
> > > > > the following changes to the MAILMAN SITE
> > > >
> > > > PARAMETERS
> > > >
> > > > > file
> > > > > CPU (UCI,VOL) FOR FILER TO RUN : ROU,ROU
> > > > > where ROU is UCI associated to ROU in UCI
> > > > > ASSOCIATION
> > > > > file
> > > > > and ROU is volume set
> > > > > please help me to start the filer
> > > > >
> > > > > The output after D ^XMUT5 is
> > > > > Delivery Queue Status as of 1/27/[EMAIL PROTECTED]:09:31
> > > > >
> > > > > Deliveries COMPLETED since last 1/2 hour:
> >
> > 10523
> >
> > > > > (10514
> > > > > Msg, 9 Resp)
> > > > > Number of delivery queues: 1 Message and 1
> > > >
> > > > Response
> > > >
> > > > > Waiting time for items to be put in the
> >
> > delivery
> >
> > > > > queues: 10 0:15:11
> > > > >
> > > > > Nothing in the delivery queues.
> > > > >
> > > > > Background filer status:
>
> === message truncated ===
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> Hardhats-members mailing list
> Hardhats-members@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/hardhats-members
--
Nancy Anthracite
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Hardhats-members mailing list
Hardhats-members@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hardhats-members
