The motherboard connector is standard (I believe.)
+5 +5 D2- D3- D2+ D3+ Gnd Gnd Key NC
The cable is broken into four cable sets: 1Power 1D- 1D+
2Power 2D- 2D+
and two grounds.
I assume that 1Power/1D-/1D+ goes on the D2 side and the 2Power/2D-/2D+ goes on the D3 side, but I can't tell if the grounds are associated with a specific cable set. Does it matter which ground I put on which side? If so, how do I figure out which is which?
You could put the 2Power/2D-/2D+ on the D2 side.
The only thing that really matters is that you don't have the thing turned around putting the + connectors on the power leads otherwise when you plugin a USB device into the USB port you will blow the device.
----------+----------
Wayne D. Johnson
Ashland, OH, USA 44805
<http://www.wavijo.com>
