How bizarre I would have thought that Windows would have configured all the necessary items since it gave you the option of selecting the desired Connection. I finally got what looks like consistent results after manually changing the metric both of the TCP/IP and Gateways for each connection.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Sevart Sent: Tuesday, April 25, 2006 3:02 PM To: The Hardware List Subject: Re: [H] Network, Internet Problem One would hope that Windows would assign each interface a different metric. That's why I wanted the "route print" output. For a given address, windows should choose the interface with the lowest metric. Greg ----- Original Message ----- From: "Mesdaq, Ali" <[EMAIL PROTECTED]> To: "The Hardware List" <[email protected]> Sent: Tuesday, April 25, 2006 1:19 PM Subject: RE: [H] Network, Internet Problem >I believe what's happening is that since they are both on the same > network address you basically have 2 default gateways on each card. How > would the OS know which one to go out on if it's on the same range? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of rls > Sent: Tuesday, April 25, 2006 10:59 AM > To: 'The Hardware List' > Subject: [H] Network, Internet Problem > > I have 2 network cards in my computer. One connects to a cable > modem/router > the other card connects to a DSL router. > > Each router is set up with networks using 192.168.2.x. > > When I have both cards enabled I cannot connect to the internet. When I > disable either card I can connect. > > What's going on? > > Would things improve if I changed the network addresses range on either > router? > > > > >
