Bad USB can cause your problem and the test is easy disconnect all usb at hos location and see if results change
I have a client with a brother hydra and that bastard will blue screen any pc I have ever attached it to CW Sent via BlackBerry from Cingular Wireless -----Original Message----- From: "Thane Sherrington (S)" <[EMAIL PROTECTED]> Date: Fri, 02 Jun 2006 14:10:55 To:[email protected] Subject: [H] X2 problems Ok, I can't figure this out, so I'm turning (once again) to the Collective. I have a customer with an AMD X2 3800+ system. In the shop it runs fine: I've run Burn-In-Test Pro 4 and 5 for 110 hours, I ran UT2004 in demo loop for 50 hours, and I ran various Photoshop benchmarks. Then I just used the computer for eight hours. I also left machine sitting overnight idle several times. At the client's site, the machine locks (first the mouse stops responding but one can still tap the numlock and have response from the keyboard for a few seconds and then it locks as well) randomly one to four times a day. Sometimes it spontaneously reboots, and occasionally blue screens (with an 0x0000007D error.) That error suggests RAM as a problem, but MemTest says no problems in 40 passes. Here's my question: Can a bad USB or parallel device cause this sort of problem? Is there anything else I'm missing? T
