You mean you don't CARE? I would be going crazy not knowing! I would want to do the SAME cleaning and put the old card back in this time,
And see if it works, and if it doesn't work, then the card was the problem.. If it DOES work, then the problem was the drivers, which you cleaned up. You could always do it, just so we know what it was... ) Ken -------Original Message------- From: Bill Cohane Date: 1/26/2007 1:58:18 AM To: The Hardware List Subject: Re: [H] Video Problems (NVidia related) At 00:57 01/26/07, KHumrich wrote: >How is your Power Supply? You said the card powers down and/or runs >fine at the lower resolution, also the problem happens on cold boots, >sounds like power supply COULD be the problem..Ken Hi Ken Thanks for the suggestion. I have to admit that I didn't consider the power supply. On the one hand, it's a PCP&C 510 Watt supply (costs over $190) and I would hope that it isn't the problem. On the other hand, there are seven Seagate 15K Cheetahs in the case (and SCSI CDRW and DVD reader) along with the dual processors. Actually, the computer would show video just fine in 640X480, if (and only if) it was using the Microsoft generic VGA driver. (That's what choosing VGA Mode in the boot menu results in.) But the video always failed at 640X480 after booting into regular Win2k. (Video would corrupt a fraction of a second after Win2k started to display the desktop in regular Win2k.) I think video was failing right when Win2k switched to the manufacturer's video driver (either NVidia reference drivers or Asus drivers). So at the same resolutions, the MS generic VGA driver always worked but the NVidia (or Asus) drivers wouldn't. Okay. An hour ago I changed video cards again. I replaced the Asus FX5200 with a Leadtek A6200 that came by UPS today. First I uninstalled the NVidia driver software set, then deleted the video card from Device Manager, and then ran an utility called Driver Cleaner. (Thanks M!) Then I pulled the Asus card and put in the Leadtek card. I installed drivers from the Leadtek CD-Rom and all seems fixed. I've warm -and- cold booted many times and it is now running in 1600X1200 with 32 bit color. Time will tell if it keeps running. I don't know if the problem was a bad video card, corrupted drivers (fixed by using Drive Cleaner), or if it will return. Regards, Bill >-------Original Message------- > >From: Bill Cohane >Date: 1/25/2007 6:28:18 PM >Subject: [H] Video Problems (NVidia related) > >I've been trying to set up one of a new Dell 2007FP monitor >the past two days and I keep having big problems. I'll >understand if you don't want to read all the following, but >doing so will let you know all the steps that I've tried. > >Basically, my system boots okay into Win2k "VGA Mode" >(640X480, 256 colors, 60 Hz.) but video is completely >corrupted whenever I boot into regular Win2k......
