I'm not sure how the loads will be but all components are built into the board. There is an eisa slot but it won't be used. Used onboard outputs will be ethernet, VGA, mouse/kbd (during initial config - but will be removed once PBX is configured and everything will be web or console configured after that). So basically the machine will be using ethernet and will be running a small laptop or solid state 2.5 drive.
lopaka DHSinclair <[EMAIL PROTECTED]> wrote: lopaka, I'll print your sent gifs and analyze. Seems to be doable, but what can I possibly know...... ! There could be some missing stuff........ A few days at best. I'll be back. Worst question will be "loads" on the various lines.............. Mele Kalikemaka Bro! I'm on it. Best, Duncan At 10:51 12/22/2007 -0800, you wrote: >No rush, I want to build a small asterisk PBX box with this board but >can't start without a power connector. Thanks & Happy Holidays! > >lopaka > >DHSinclair wrote: Bro, >How soon do you need an answer? >Best, >Duncan > >At 10:03 12/22/2007 -0800, you wrote: > >I have a small P3 embedded motherboard that didn't come with the power > >adapter. How would you wire an ATX power supply to connect to this? Any > >help appreciated. > > > >http://www.interfacebus.com/ATX_Main_Power_Pinout.gif > > > >to > > > >http://63.193.210.31:90/power.jpg > > > >TIA > >lopaka
