Rick,
I will try as you suggest. Nothing I read in my Avocent docs indicate
that the KVM switch mucks around with whatever RES I set in Windows.
But stuff happens! I will check.......... :)
Best,
Duncan
Rick Glazier wrote:
1024x768 works here on my CRT, for "all" browser based WEB pages.
Only if I go below that (smaller numbers), (and then not always) do I have
to scroll side to side in a Browser.
I'll check later on my Laptops and W/S LCDs, but this seems nuts a W/S LCD
would display in such a non-W/S way...
I would say the problem rests with the analog output being set wrong,
or the KVM not emulating the correct res. Try it without the KVM as a
test...
(I'm not currently using mine because it has a lot of "odd"and/or
aberrant behaviors...)
Rick Glazier
From: "DSinc"
Ever since I got my Dell E207WFPc 20" wide-screen panel, I have
noticed that web pages always display too wide. I always get the bar
at the bottom of the screen display to move Right to see the REST of
the page.
I can not seem to stop this behavior. Can I?
The Panel's native resolution is 1680x1050x60. I use it with
1024x768x60. I also use analog because my KVM switch will NOT do DVI
cabling.
Two of my video cards will not do 1680x1050x60 at all. And, I can not
read stuff comfortably at this default resolution even on the one PC
that does have a video card able to do this resolution.
Is there any fix, or, happy medium I can try?
Thanks,
Duncan
