Hi Tim, Does R-Studio do the RAID0 or would I need R-Studio Technician? I couldn't find a side by side comparison of the features. I don't mind getting the $79.99 version but this date is not worth $899 :)
I am going to download the demo and test it but just wondered if you knew? Thanks, Gary -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Hunter, Gary Sent: Friday, August 14, 2009 9:27 AM To: [email protected] Subject: Re: [H] Western Digital My Book problem Thanks Tim, I don't think there is any important data on the drive. It's mainly TV progs from the UK so I don't want to spend a great deal to get the data back (I'll keep you in mind though). I'll do the WD diagnostics this evening and see how it goes. I'll post an update later. The WD indeed stripes across the 2 disks not sure on the data chunk size though. I'll have to dig a little deeper. >From your note am I to believe that striping across the disks is generic and there probably isn't a manufacturer specific algorithm? This is interesting as I just assumed it would be proprietary. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim Lider Sent: Friday, August 14, 2009 9:17 AM To: [email protected] Subject: Re: [H] Western Digital My Book problem Hello Gary, This might work. Although, I would pull t hem out and see if each drive works correctly. Do not expect to get the data off that way. Most 2 disk RAID 0 systems use 128kB stripe, you can use a recovery software like r-tools to recover the data if the drives work. If one of the drives do not work, you're basically screwed. Well not really, there is always me trolling the list :) Regards and good luck, Tim Lider Sr. Data Recovery Specialist Advanced Data Solutions, LLC http://www.adv-data.com > -----Original Message----- > From: [email protected] [mailto:hardware- > [email protected]] On Behalf Of Hunter, Gary > Sent: Thursday, August 13, 2009 8:38 PM > To: [email protected] > Subject: [H] Western Digital My Book problem > > Hi, > > I have a Western digital 1TB My Book Pro II which all of a sudden won't > power on. > > When I insert the power cable in the back the light flashes on but that > is it. When I hit the reset button the light also comes on but then > nothing. This unit has 2x500GB drives. I have them configured in raid 0 > to utilize the whole disk. I want to recover the data before RMAing it > to WD. > > Is there some software raid I can use and directly plug them into my > desktop's SATA connection? > > I am assuming if I bought another drive of the same model off ebay I > could just switch the drives and recover the data. If I had to buy > another drive I would rather get a newer 2TB version. Is it a bad idea > to assume I could put the drives into the 2TB chasis and expect them to > work? > > Or (I know this is a long shot) does anyone have one of these drives > that they are willing to take apart and put my drives in to recover the > data? > > Any advice would be appreciated. > > Thanks, > > Gary > If you are not the intended recipient of this e-mail message, please > notify the sender > and delete all copies immediately. The sender believes this message and > any attachments > were sent free of any virus, worm, Trojan horse, and other forms of > malicious code. > This message and its attachments could have been infected during > transmission. The > recipient opens any attachments at the recipient's own risk, and in so > doing, the > recipient accepts full responsibility for such actions and agrees to > take protective > and remedial action relating to any malicious code. Travelport is not > liable for any > loss or damage arising from this message or its attachments. > > > If you are not the intended recipient of this e-mail message, please notify the sender and delete all copies immediately. The sender believes this message and any attachments were sent free of any virus, worm, Trojan horse, and other forms of malicious code. This message and its attachments could have been infected during transmission. The recipient opens any attachments at the recipient's own risk, and in so doing, the recipient accepts full responsibility for such actions and agrees to take protective and remedial action relating to any malicious code. Travelport is not liable for any loss or damage arising from this message or its attachments. If you are not the intended recipient of this e-mail message, please notify the sender and delete all copies immediately. The sender believes this message and any attachments were sent free of any virus, worm, Trojan horse, and other forms of malicious code. This message and its attachments could have been infected during transmission. The recipient opens any attachments at the recipient's own risk, and in so doing, the recipient accepts full responsibility for such actions and agrees to take protective and remedial action relating to any malicious code. Travelport is not liable for any loss or damage arising from this message or its attachments.
