On Sat, Jul 03, 2010 at 03:59:19PM -0400, DSinc wrote:
> Bryan,
> OK. Your setup makes sense to me. Can you share what kinds of settings
> you use at your Router? I was thinking stuff like:
>
> Enable DNS Relay: ???
Sure.
> Enable RIP: ???
No.
> Enable DHCP Server: ???
Depends, make sure only one device on your lan is doing this function.
>
> WAN Mode: Static/DHCP/PPPoE/PPTP/L2TP ?
> UName: n/a
> PW: n/a
> Adress Mode: Dynamic IP/Static IP ?
> Reconnect Mode: On-Demand/Always On/Manual
Settings from your ISP, should be ethernet/DHCP to obtain a WAN ip.
> Max Idle Time: 0=infinite/???
Infinite.
> Pri DNS Server: ??? (208.67.222.222 planned?)
> Sec DNS Server: ??? (208.67.220.220 planned?)
> MTU: ??? (currently 1492 (default=1492))
> Link Drop Delay: ??? (currently 120sec.(0=infinite))
Thats fine.
> MAC Cloning Enabled: ??? (currently YES!!... ;)
Should not be needed in your setup, this is used if you have a wifi AP or
something hooked up to your ONT, and you switch it out
but want to make the ONT think the device is the same as to not disrupt service.
--
Bryan G. Seitz
