Okay, so thinking about anti-glare coating now makes the decision even
more complicated, but thanks for mentioning that. Where the monitor
will sit will have the main room light off to one side and behind, so
there would be glare on a shiny screen. I was wondering about those
monitors without the converter boards. About all I run on this system
would be libre office and Sonar, so I don't think I'd need any
conversion at all.
So far all I've been checking out is Amazon, I'll give Monoprice a
look. Amazon has over 100 different 27" monitors with the higher
resolution, but the actual specs are sometimes scanty, and a lot of
times the reviews don't help at all.
Thanks...Steve
On 9/11/2013 7:37 PM, Greg Sevart wrote:
I have four 27" 2560x1440 monitors, and agree that they're about the best
size/resolution combination available. Even the 30" 2560x1600 monitors are
inferior in one critical way - pixel density and therefore text sharpness.
Two of mine are Microcenter IPS models that are similar to the Monoprice or
eBay South Korean imports, except they have a converter board and multiple
input types. They're nice monitors for sure, but they come with a pretty
cruddy stand and thick bezels that have a lower-end look. The screens are
great - each one has one dead pixel, but at that density, it's honestly
impossible to tell unless you're looking for it. I never notice in normal
use.
The other two are Asus PB278Q displays, which feature Samsung's PLS
technology. PLS and IPS are very similar; to a large degree, PLS is just
Samsung's version of IPS. I find the contrast to be superior to the two IPS
27's I have, plus they have a fully adjustable stand and a thinner bezel
that looks more professional.
If I were buying today on a tight budget, I'd opt for a South Korean PLS
import (they're actually a little cheaper than the IPS, but are of similar
or better quality) off eBay. If I were willing to spend a little more on
something with a better package, better warranty, and some brand
recognition, I'd buy the ViewSonic VP2770-LED. It's based on the same PLS
panel as the Asus units I have, but has a better backlight.
One decision you may need to make is regarding anti-glare. The import models
may be available with or without ("glossy") AG coatings. The PLS AG coatings
are effective, but light enough that they don't cause sparkling on bright
colors. Most of the cheap/import IPS models are glossy, but those that do
have anti-glare use a very aggressive coating that I've grown a great
distaste for (and Dell's 27's prior to the latest model had this bad AG too)
after having used monitors without it. All else being equal, glossy coatings
offer the best image quality, but if you have much light in your room they
may not be a good choice. I believe that the light AG which available with
the PLS imports, the PLS name brands, and some of the latest generation of
name-brand IPS units is the best choice.
Greg
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Gary Udstrand
Sent: Wednesday, September 11, 2013 5:55 PM
To: [email protected]
Subject: Re: [H] 27" Monitors
Mono-price is now selling monitors and they are getting great reviews. I
have a WHQL 27 inch monitor already (Dell), and as soon as my new desk gets
here I am going to order another from Monoprice. :-)
--
Gary
http://www.twigsandtracks.com<http://s.wisestamp.com/links?url=http%3A%2F%2F
www.twigsandtracks.com&sn=>
Twigs snap and tracks fade, a photograph reacquaints Twigs and Tracks Blog:
Superior
Sunrise<http://s.wisestamp.com/links?url=http%3A%2F%2Fblog.twigsandtracks.co
m%2F2012%2F03%2F08%2Fsuperior-sunrise%2F%3Futm_source%3Drss%26utm_medium%3Dr
ss%26utm_campaign%3Dsuperior-sunrise&sn=>
On Wed, Sep 11, 2013 at 5:14 PM, Steve Tomporowski
<[email protected]>wrote:
I'm thinking of getting a 27" monitor for my DAW system (currently a 21"
and an old 19" 4-3 monitor) so I'm looking for recommendations for
something with good value ($1000+ monitors are out). Maybe it's me,
but I don't see the rationale in going from a 21" 1920x1080 to a 27"
1920x1080, unless it's for failing eyesight. So....I'd like to get
the resolution up to 2560x1440. Most of the cheap 27" don't do that
and there are several that don't have an 'AD' board. I'm assuming
that's the resolution scaling board. So what's good that's 27", 2560x1440
and don't require a mortgage?
Thanks...Steve
