Tim,
Thanks. I'll dig some more. I don't install floppies anymore; and, my
opticals use
screws that have a much smaller diameter.
TNX,
Duncan
On 06/09/2014 13:30, Tim Lider wrote:
I just purchased one for my computer and I think it used Floppy type screws
or screws that go in the Optical Drives. They did not look like 6-32 Hard
Drive Screws. Sorry I do not know the measurement for the screws.
BTW, I got a 2.5" to 3.5" mount bracket for it for like $4.99 at the store I
bought it from.
I have a screen shot of the speed test of both the new SSD and the old 10k
rpm HD I had.
Regards,
Tim Lider
Sent from:
Intel i7-2600K Running at 4.35GHz with 16GB of PC3 RAM running at 1,620MHz
Boot HD Samsung 840 Pro 256GB.
-----Original Message-----
From: Hardware [mailto:[email protected]] On
Behalf Of DSinc
Sent: Monday, June 9, 2014 10:20 AM
To: HWG
Subject: [H] Samsung 840PRO SSD?
Can any Samsung 840PRO SSD user please confirm that the threaded
mounting points are truly #6-32 as mentioned in the docs that come with
the Samsung SSD.
The #6-32 screws I've used in the past for my EMC hard drives (WD,
Hitachi, Seagate, etc.) do not match the threads on the SSD at all.
There is no purchase at all.
Yes, I am leaning toward duct tape for future mounting of these
SSDs..................... :) Thanks, Duncan
