Joachim Steiger wrote: > - i really like my mini-usb. (for mechanical, practical and spread in > the real world)
Me too. Of course, if the market really switches to micro-USB, the scenario may be very different in a few months. If only Nokia use micro-USB, we'll be of course happier with mini. We may be able to design for one, and change our minds later. The problem here is mainly the case. Apparently, it's fiendishly expensive and time-consuming to make the molds, but some changes can apparently be accommodated without too much pain. > - the N8xx series is the only device i know i were near which does OTG > as far as i know. I don't know enough about OTG to tell whether it's actually good or bad. Of course, if it becomes popular, we'd look rather silly with our own hack. > * i would rather like A due to the more widespread of cables and > devices, but its propably too big Yeah, I'd have to dig quite deep into my gadgets box to actually find something that does mini-A. > * put a single 2-positions switch below the battery flap to switch this > whole port to jtag. That's where your proposal gets a bit messy. It means that we couldn't have JTAG/serial console and host mode. So if anything blows up there, we're blind. Not the end of the world (after all, we survive quite well on the PC, without having all these niceties), but unpleasant. > please let me know what you think The host vs. JTAG/console exclusion aside, it has a nice ring to it. One bit that may be troublesome is the USB switch, though. USB is very finicky about line impedance, reflections, an all that, so making a switch that doesn't distort the signal too much may be difficult to make. - Werner _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
