So"ren Apel wrote: > On Mon, 2008-08-18 at 19:59 +0800, matt_hsu wrote: > >> The original design is, it can be turned-off by configuring CHIP_PWD pin >> as LOW. >> Somehow, it doesn't work at all since firmware's issue. >> > > Am I understanding correctly that switching CHIP_PWD to high/low was > supposed to turn the Ar6k on and off? > Yes. > If so, does the brokenness of CHIP_PWD mean that the Ar6k needs a > firmware update to make this work? > Yes. > And if that again is correct, is there a way to get this new firmware > deployed in the field? > I'm not sure of this. :( Just be curious, why you need to turn off Ar6k completely?
Matt > >> Basically, you can't turn off the Ar6k entirely once you trigger the >> CHIP_PWD ping. >> The alternative way is to use wmiconfig to let Ar6k get into suspend mode. >> > > What does this mean exactly? "can't turn off [...] once you trigger the > CHIP_PWD ping"? > > And I do hope that suspend mode is not the final "solution" for this > matter... > > Regards, > -Soeren > > > ------------------------------------------------------------------------ > > _______________________________________________ > hardware mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/hardware > _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
