[ Cc'ing the hardware list again. I think you dropped it by accident. ] Angus Ainslie wrote: > Can someone suggest a digikey part number so the less hardware oriented > might try it ?
If you don't mind the "short everything" case, then I think any 2.5mm audio plug will do fine. The microphone signal is at the tip/center, while ground is on the outmost ring. Regular stereo plugs (with only three rings) will short the left speaker to ground, but that shouldn't be a problem. Here's what this looks like: http://people.openmoko.org/werner/headset-suppressor.jpg >From left to right: - the headset suppressor, with the ground thingy folded back onto itself and soldered to all other contacts - a standard 2.5mm stereo plug - the Openmoko headset's plug 2.5mm stereo plugs should be available at any local parts store. I even had no problems finding them in Argentina ;-) - Werner _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
