Am Mi 1. Oktober 2008 schrieb Kyle Bassett: > Do the channel numbers of the following block diagram still apply? > http://wiki.openmoko.org/wiki/Image:WM8753_ALSA_Mapping.png > > That's from the > http://wiki.openmoko.org/wiki/Neo_1973_audio_subsystempage. As long > as the hardware connection information is correct on that > page, I will just work backwards. > > Another note: while playing back using stereoout.state, the headset and the > stereo speakers play at the same time. Is there a way to mute/switch off > either output? I don't recall if that was a GTA01v4 hardware glitch or > something else.
audio subsystem is quite identical in GTA01 and GTA02 (except the mono amp in 02 vs stereo in 01). Speaker(s) and headhones are mutually exclusive, means you mustn't connect headphones and then play back thru speaker, as hp can't be disabled. Instead you have to switch amp to hp-mode when hp plugged in, what means speaker(s) is(/are) disabled. cheers jOERG
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
